Home |
Search |
Today's Posts |
#1
|
|||
|
|||
AKG K501
Hello,
I am looking for an frequency response of the AKG K501 headphone. Could anybody help me? Thanks Markus |
#2
|
|||
|
|||
Markus wrote:
I am looking for an frequency response of the AKG K501 headphone. Could anybody help me? 16 - 30K Hz http://www.akg.com/products/powersla...iew,specs.html |
#3
|
|||
|
|||
Thanks for you response. But I am looking for an frequency response and
not for the frequency range. That means I need a picture with an magnitude and a phase response, because I am interest in the attenuation at the low frequency range like 16 - 100Hz. Eric schrieb: Markus wrote: I am looking for an frequency response of the AKG K501 headphone. Could anybody help me? 16 - 30K Hz http://www.akg.com/products/powersla...iew,specs.html |
#4
|
|||
|
|||
Markus wrote:
Thanks for you response. But I am looking for an frequency response and not for the frequency range. That means I need a picture with an magnitude and a phase response, because I am interest in the attenuation at the low frequency range like 16 - 100Hz. Eric schrieb: Markus wrote: I am looking for an frequency response of the AKG K501 headphone. Could anybody help me? 16 - 30K Hz http://www.akg.com/products/powersla...iew,specs.html here is a FR diagram, the size and resolution is not the best, but certainly you will understand that the response is rarely quoted. This is mainly a general problem with headphones, as there will be resonances when coupled to the ear because of the channel length and form. Since these vary individually, only custom made filters will help here. http://www.headphone.com/guide/by-ma.../akg-k-501.php -- ciao Ban Bordighera, Italy |
#5
|
|||
|
|||
Markus wrote:
Hello, I am looking for an frequency response of the AKG K501 headphone. Could anybody help me? Thanks Markus check out headphone.com, HeadRoom has such graphs for many phones, maybe you'll find yours too.. |
#6
|
|||
|
|||
"Markus" wrote in message
... Thanks for you response. But I am looking for an frequency response and not for the frequency range. That means I need a picture with an magnitude and a phase response, because I am interest in the attenuation at the low frequency range like 16 - 100Hz. Eric schrieb: Here you go. http://www.headphone.com/products/he.../akg-k-501.php Tim McTeague |