Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
michael conner
 
Posts: n/a
Default Technics receiver center channel goes out at low volume

Hi all,

Have a Technics home theater receiver. Have an intermittent problem
with center channel -- sometimes after turning on receiver will get no
sound from center channel, but it's possible to turn up the volume
until the center channel just comes on. I can then turn down the
volume and the center channel stays on.

Have checked speaker wire connections, even changed out the wire.
After a couple of searches on Google Groups, it sounds like it is a
"speaker protection relay" problem. Does that sound right? Is this
something that can be readily fixed with, say, a can of compressed air?
(There was quite a bit of dust over the ventilation grill...) If so,
are these things relatively easy to find inside the receiver?

Thanks in advance!

 
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Technics receiver overload Don Phillipson Tech 5 February 21st 05 06:25 PM
Howard's Three Channel Solution Carl Valle Audio Opinions 3 September 7th 04 08:54 PM
Designs for a single frequency high performance AM-MW receiver? Gary Jensen Vacuum Tubes 141 June 30th 04 07:13 PM
FS: Technics SA-425 Receiver Ken Drescher Marketplace 3 June 4th 04 04:31 AM
Main speakers with builtin subwoofer - How to configure receiver? Michael Harder Audio Opinions 0 October 28th 03 11:18 PM


All times are GMT +1. The time now is 12:11 AM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"