Home |
Search |
Today's Posts |
#4
Posted to rec.audio.opinion
|
|||
|
|||
Using F-connector for sub-woofer?
Thanks Robert and Arny,
I thought the same thing, so I am going to abandon the 2 F connectors, well, actually I am going to use one for my outdoor FM radio antenna connection. G There is a rear surround 5-way binding post, that I am just going to use for the sub-woofer, and relabel the jack plate. (It's in a cabinet anyway.) I appreciate both of your prompt responses and confirmation that their design is wacky! G Cheers, Alan "Arny Krueger" wrote in message ... "Alan Baldwin" wrote in message et I am wiring up my home theatre, and purchased a wall plate to terminate all the in-wall and in-ceiling speaker wires. The plate I purchased is a Russound. It has 2 F-connectors labeled for SUB1 & SUB2. Can anyone tell me why they would have that,instead of speaker posts, like the rest of the connectors? This plate was clearly designed for use with an antenna, cable or satellite system. Is there an adapter I'm supposed to purchase or something? Get a plate with the right connectors, and don't get mislead by cryptic markings. If you are connecting speakers to amplifier speaker outputs, the *right* connector would be something like banana jacks or (better) 5-way binding posts. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Consequences of replacing 8 ohm woofer with 4 ohm woofer in home theater sub? | Tech | |||
Question for the Ferstlerian | Audio Opinions | |||
Mackie HR824 Woofer Problem | Pro Audio | |||
Article draft from Ferstler | Audio Opinions | |||
Dynaco A25 XL Speaker - Need crossover diagram. | Tech |