[Barry & Nikki]

If anyone here has a wrecking yard or is an installer (don't think I will
find any installers here though I am in need of an OEM Honda car stereo
wiring harness. I know most installers today use adapter harnesses but just
in case someone just cut out the factory harness I am in need of it. It is a
20 pin black plug on the back of the stereo I am looking for. looking at the
back of the stereo the clip is located on the top with the two alignment
grooves on the bottom. On each side left/right there are 4 larger pins off
centered upward from the rest of the smaller pins. the 12 remaining pins are
smaller (6 top/bottom) and are located a tad lower than the previously
mentioned 8 larger. If you need a pic please email me and I can get one if
you think it will help. Otherwise thanks in advance to ANYONE that can help.
Oh the stereo is an in dash 6-disc w/ tape model: 39100-S82-A300 ref #:
CQ-EH1063Z and man. in yr. 2000

[Barry & Nikki]

Well to be honest I have not a clue other than the year 2000 that the stereo
has stamped on it. I got the stereo in a police auction lot quite some time
ago and just remembered about it being in the back room and figured I should
try and get a harness for it. If it actually works I would be putting it in
my wife's commuter car since the stereo has a stock look and not flashy like
all the other stereos I have. Being she parks at a park-n-ride lot I have
never wanted to put a stereo that screams "STEAL ME!!!" in the car and the
one in it currently does not have CD.