Home |
Search |
Today's Posts |
#1
|
|||
|
|||
1-Bit Wave File?
I am looking for audio software that allows conversion of 16-bit WAVs
and 8-bit WAVs to 1-bit WAVs. I have used Adobe Audition and CakeWalk Pyro. Neither of them work. CakeWalk does have a "bit-depth converter" as a FX, however, when I try to use it, I get a runtime error and Cakewalk automatically closes. |
#3
|
|||
|
|||
1-Bit Wave File?
(Curious) writes:
I am looking for audio software that allows conversion of 16-bit WAVs and 8-bit WAVs to 1-bit WAVs. Why do you want to convert to a 1-bit WAV? -- % Randy Yates % "Maybe one day I'll feel her cold embrace, %% Fuquay-Varina, NC % and kiss her interface, %%% 919-577-9882 % til then, I'll leave her alone." %%%% % 'Yours Truly, 2095', *Time*, ELO http://home.earthlink.net/~yatescr |
#4
|
|||
|
|||
1-Bit Wave File?
(Curious) writes:
I am looking for audio software that allows conversion of 16-bit WAVs and 8-bit WAVs to 1-bit WAVs. Why do you want to convert to a 1-bit WAV? -- % Randy Yates % "Maybe one day I'll feel her cold embrace, %% Fuquay-Varina, NC % and kiss her interface, %%% 919-577-9882 % til then, I'll leave her alone." %%%% % 'Yours Truly, 2095', *Time*, ELO http://home.earthlink.net/~yatescr |
#5
|
|||
|
|||
1-Bit Wave File?
(Curious) writes:
I am looking for audio software that allows conversion of 16-bit WAVs and 8-bit WAVs to 1-bit WAVs. Why do you want to convert to a 1-bit WAV? -- % Randy Yates % "Maybe one day I'll feel her cold embrace, %% Fuquay-Varina, NC % and kiss her interface, %%% 919-577-9882 % til then, I'll leave her alone." %%%% % 'Yours Truly, 2095', *Time*, ELO http://home.earthlink.net/~yatescr |
#6
|
|||
|
|||
1-Bit Wave File?
|
#7
|
|||
|
|||
1-Bit Wave File?
|
#8
|
|||
|
|||
1-Bit Wave File?
|
#9
|
|||
|
|||
1-Bit Wave File?
|
#10
|
|||
|
|||
1-Bit Wave File?
Curious wrote:
I am looking for audio software that allows conversion of 16-bit WAVs and 8-bit WAVs to 1-bit WAVs. I have used Adobe Audition and CakeWalk Pyro. Neither of them work. CakeWalk does have a "bit-depth converter" as a FX, however, when I try to use it, I get a runtime error and Cakewalk automatically closes. Do you really want a 1-bit on/off signal or did you mean to ask about 1-bit delta sigma modulation? |
#11
|
|||
|
|||
1-Bit Wave File?
Curious wrote:
I am looking for audio software that allows conversion of 16-bit WAVs and 8-bit WAVs to 1-bit WAVs. I have used Adobe Audition and CakeWalk Pyro. Neither of them work. CakeWalk does have a "bit-depth converter" as a FX, however, when I try to use it, I get a runtime error and Cakewalk automatically closes. Do you really want a 1-bit on/off signal or did you mean to ask about 1-bit delta sigma modulation? |
#12
|
|||
|
|||
1-Bit Wave File?
Curious wrote:
I am looking for audio software that allows conversion of 16-bit WAVs and 8-bit WAVs to 1-bit WAVs. I have used Adobe Audition and CakeWalk Pyro. Neither of them work. CakeWalk does have a "bit-depth converter" as a FX, however, when I try to use it, I get a runtime error and Cakewalk automatically closes. Do you really want a 1-bit on/off signal or did you mean to ask about 1-bit delta sigma modulation? |
#13
|
|||
|
|||
1-Bit Wave File?
Curious wrote:
I am looking for audio software that allows conversion of 16-bit WAVs and 8-bit WAVs to 1-bit WAVs. I have used Adobe Audition and CakeWalk Pyro. Neither of them work. CakeWalk does have a "bit-depth converter" as a FX, however, when I try to use it, I get a runtime error and Cakewalk automatically closes. Do you really want a 1-bit on/off signal or did you mean to ask about 1-bit delta sigma modulation? |
#14
|
|||
|
|||
1-Bit Wave File?
On 2004-05-16, Curious wrote:
I am looking for audio software that allows conversion of 16-bit WAVs and 8-bit WAVs to 1-bit WAVs. I have used Adobe Audition and CakeWalk Pyro. Neither of them work. CakeWalk does have a "bit-depth converter" as a FX, however, when I try to use it, I get a runtime error and Cakewalk automatically closes. The software in the Roland SP-808 lets you do this...in real time, even. You use a knob to select the number of bits. Plus, it lets you adjust the sample rate and even whether or not you want the noise-shaping filter turned on! p.s. I found this link on Randy Yates' page about noise-shaping... http://home.earthlink.net/~yatescr/noiseb.ps I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." rock and roll, -N -- different MP3 every day! http://gweep.net/~shifty/snackmaster . . . . . . . . ... . . . . . . "Maybe if you ever picked up a goddamn keyboard | Niente and compiler, you'd know yourself." -Matthew 7:1 | |
#15
|
|||
|
|||
1-Bit Wave File?
On 2004-05-16, Curious wrote:
I am looking for audio software that allows conversion of 16-bit WAVs and 8-bit WAVs to 1-bit WAVs. I have used Adobe Audition and CakeWalk Pyro. Neither of them work. CakeWalk does have a "bit-depth converter" as a FX, however, when I try to use it, I get a runtime error and Cakewalk automatically closes. The software in the Roland SP-808 lets you do this...in real time, even. You use a knob to select the number of bits. Plus, it lets you adjust the sample rate and even whether or not you want the noise-shaping filter turned on! p.s. I found this link on Randy Yates' page about noise-shaping... http://home.earthlink.net/~yatescr/noiseb.ps I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." rock and roll, -N -- different MP3 every day! http://gweep.net/~shifty/snackmaster . . . . . . . . ... . . . . . . "Maybe if you ever picked up a goddamn keyboard | Niente and compiler, you'd know yourself." -Matthew 7:1 | |
#16
|
|||
|
|||
1-Bit Wave File?
On 2004-05-16, Curious wrote:
I am looking for audio software that allows conversion of 16-bit WAVs and 8-bit WAVs to 1-bit WAVs. I have used Adobe Audition and CakeWalk Pyro. Neither of them work. CakeWalk does have a "bit-depth converter" as a FX, however, when I try to use it, I get a runtime error and Cakewalk automatically closes. The software in the Roland SP-808 lets you do this...in real time, even. You use a knob to select the number of bits. Plus, it lets you adjust the sample rate and even whether or not you want the noise-shaping filter turned on! p.s. I found this link on Randy Yates' page about noise-shaping... http://home.earthlink.net/~yatescr/noiseb.ps I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." rock and roll, -N -- different MP3 every day! http://gweep.net/~shifty/snackmaster . . . . . . . . ... . . . . . . "Maybe if you ever picked up a goddamn keyboard | Niente and compiler, you'd know yourself." -Matthew 7:1 | |
#17
|
|||
|
|||
1-Bit Wave File?
On 2004-05-16, Curious wrote:
I am looking for audio software that allows conversion of 16-bit WAVs and 8-bit WAVs to 1-bit WAVs. I have used Adobe Audition and CakeWalk Pyro. Neither of them work. CakeWalk does have a "bit-depth converter" as a FX, however, when I try to use it, I get a runtime error and Cakewalk automatically closes. The software in the Roland SP-808 lets you do this...in real time, even. You use a knob to select the number of bits. Plus, it lets you adjust the sample rate and even whether or not you want the noise-shaping filter turned on! p.s. I found this link on Randy Yates' page about noise-shaping... http://home.earthlink.net/~yatescr/noiseb.ps I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." rock and roll, -N -- different MP3 every day! http://gweep.net/~shifty/snackmaster . . . . . . . . ... . . . . . . "Maybe if you ever picked up a goddamn keyboard | Niente and compiler, you'd know yourself." -Matthew 7:1 | |
#18
|
|||
|
|||
1-Bit Wave File?
Tachyon wrote:
I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. geoff |
#19
|
|||
|
|||
1-Bit Wave File?
Tachyon wrote:
I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. geoff |
#20
|
|||
|
|||
1-Bit Wave File?
Tachyon wrote:
I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. geoff |
#21
|
|||
|
|||
1-Bit Wave File?
Tachyon wrote:
I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. geoff |
#22
|
|||
|
|||
1-Bit Wave File?
"Geoff Wood" -nospam wrote in message
... Tachyon wrote: I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. Even with 1 bit, if properly dithered, you should be able to recognize the signal, though it will be buried in noise. I'm wondering the OP wants to convert to some type of SACD (1-bit but very high SR) format? |
#23
|
|||
|
|||
1-Bit Wave File?
"Geoff Wood" -nospam wrote in message
... Tachyon wrote: I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. Even with 1 bit, if properly dithered, you should be able to recognize the signal, though it will be buried in noise. I'm wondering the OP wants to convert to some type of SACD (1-bit but very high SR) format? |
#24
|
|||
|
|||
1-Bit Wave File?
"Geoff Wood" -nospam wrote in message
... Tachyon wrote: I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. Even with 1 bit, if properly dithered, you should be able to recognize the signal, though it will be buried in noise. I'm wondering the OP wants to convert to some type of SACD (1-bit but very high SR) format? |
#25
|
|||
|
|||
1-Bit Wave File?
"Geoff Wood" -nospam wrote in message
... Tachyon wrote: I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. Even with 1 bit, if properly dithered, you should be able to recognize the signal, though it will be buried in noise. I'm wondering the OP wants to convert to some type of SACD (1-bit but very high SR) format? |
#26
|
|||
|
|||
1-Bit Wave File?
On 2004-05-18, Geoff Wood -nospam wrote:
Tachyon wrote: I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. Fans of the Atari 2600 sound chip TIA beg to differ Each of its voices is capable of about 6 unique waveforms, each of which is a train of 0's and 1's. Additionally, square and PWM waveforms, staples of much electronic music, are 1-bit waveforms. Curiously enough, the TIA can't quite make 50% duty cycle square waves, but several close matches, like 15/31 -- different MP3 every day! http://gweep.net/~shifty/snackmaster . . . . . . . . ... . . . . . . "Maybe if you ever picked up a goddamn keyboard | Niente and compiler, you'd know yourself." -Matthew 7:1 | |
#27
|
|||
|
|||
1-Bit Wave File?
On 2004-05-18, Geoff Wood -nospam wrote:
Tachyon wrote: I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. Fans of the Atari 2600 sound chip TIA beg to differ Each of its voices is capable of about 6 unique waveforms, each of which is a train of 0's and 1's. Additionally, square and PWM waveforms, staples of much electronic music, are 1-bit waveforms. Curiously enough, the TIA can't quite make 50% duty cycle square waves, but several close matches, like 15/31 -- different MP3 every day! http://gweep.net/~shifty/snackmaster . . . . . . . . ... . . . . . . "Maybe if you ever picked up a goddamn keyboard | Niente and compiler, you'd know yourself." -Matthew 7:1 | |
#28
|
|||
|
|||
1-Bit Wave File?
On 2004-05-18, Geoff Wood -nospam wrote:
Tachyon wrote: I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. Fans of the Atari 2600 sound chip TIA beg to differ Each of its voices is capable of about 6 unique waveforms, each of which is a train of 0's and 1's. Additionally, square and PWM waveforms, staples of much electronic music, are 1-bit waveforms. Curiously enough, the TIA can't quite make 50% duty cycle square waves, but several close matches, like 15/31 -- different MP3 every day! http://gweep.net/~shifty/snackmaster . . . . . . . . ... . . . . . . "Maybe if you ever picked up a goddamn keyboard | Niente and compiler, you'd know yourself." -Matthew 7:1 | |
#29
|
|||
|
|||
1-Bit Wave File?
On 2004-05-18, Geoff Wood -nospam wrote:
Tachyon wrote: I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. Fans of the Atari 2600 sound chip TIA beg to differ Each of its voices is capable of about 6 unique waveforms, each of which is a train of 0's and 1's. Additionally, square and PWM waveforms, staples of much electronic music, are 1-bit waveforms. Curiously enough, the TIA can't quite make 50% duty cycle square waves, but several close matches, like 15/31 -- different MP3 every day! http://gweep.net/~shifty/snackmaster . . . . . . . . ... . . . . . . "Maybe if you ever picked up a goddamn keyboard | Niente and compiler, you'd know yourself." -Matthew 7:1 | |
#30
|
|||
|
|||
1-Bit Wave File?
Tachyon wrote:
On 2004-05-18, Geoff Wood -nospam wrote: Tachyon wrote: I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. Fans of the Atari 2600 sound chip TIA beg to differ Each of its voices is capable of about 6 unique waveforms, each of which is a train of 0's and 1's. Additionally, square and PWM waveforms, staples of much electronic music, are 1-bit waveforms. Curiously enough, the TIA can't quite make 50% duty cycle square waves, but several close matches, like 15/31 That's all gobbledygook for all the OP cares. He wants to CONVERT .wav files to 1-bit form. Either he knows why he wants it, or he doesn't know what he wants. Either way, talk of TIA and PWM won't help him. Jerry -- Engineering is the art of making what you want from things you can get. ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ |
#31
|
|||
|
|||
1-Bit Wave File?
Tachyon wrote:
On 2004-05-18, Geoff Wood -nospam wrote: Tachyon wrote: I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. Fans of the Atari 2600 sound chip TIA beg to differ Each of its voices is capable of about 6 unique waveforms, each of which is a train of 0's and 1's. Additionally, square and PWM waveforms, staples of much electronic music, are 1-bit waveforms. Curiously enough, the TIA can't quite make 50% duty cycle square waves, but several close matches, like 15/31 That's all gobbledygook for all the OP cares. He wants to CONVERT .wav files to 1-bit form. Either he knows why he wants it, or he doesn't know what he wants. Either way, talk of TIA and PWM won't help him. Jerry -- Engineering is the art of making what you want from things you can get. ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ |
#32
|
|||
|
|||
1-Bit Wave File?
Tachyon wrote:
On 2004-05-18, Geoff Wood -nospam wrote: Tachyon wrote: I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. Fans of the Atari 2600 sound chip TIA beg to differ Each of its voices is capable of about 6 unique waveforms, each of which is a train of 0's and 1's. Additionally, square and PWM waveforms, staples of much electronic music, are 1-bit waveforms. Curiously enough, the TIA can't quite make 50% duty cycle square waves, but several close matches, like 15/31 That's all gobbledygook for all the OP cares. He wants to CONVERT .wav files to 1-bit form. Either he knows why he wants it, or he doesn't know what he wants. Either way, talk of TIA and PWM won't help him. Jerry -- Engineering is the art of making what you want from things you can get. ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ |
#33
|
|||
|
|||
1-Bit Wave File?
Tachyon wrote:
On 2004-05-18, Geoff Wood -nospam wrote: Tachyon wrote: I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. Fans of the Atari 2600 sound chip TIA beg to differ Each of its voices is capable of about 6 unique waveforms, each of which is a train of 0's and 1's. Additionally, square and PWM waveforms, staples of much electronic music, are 1-bit waveforms. Curiously enough, the TIA can't quite make 50% duty cycle square waves, but several close matches, like 15/31 That's all gobbledygook for all the OP cares. He wants to CONVERT .wav files to 1-bit form. Either he knows why he wants it, or he doesn't know what he wants. Either way, talk of TIA and PWM won't help him. Jerry -- Engineering is the art of making what you want from things you can get. ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ |
#34
|
|||
|
|||
1-Bit Wave File?
On 2004-05-19, Jerry Avins wrote:
Tachyon wrote: On 2004-05-18, Geoff Wood -nospam wrote: Tachyon wrote: I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. Fans of the Atari 2600 sound chip TIA beg to differ Each of its voices is capable of about 6 unique waveforms, each of which is a train of 0's and 1's. Additionally, square and PWM waveforms, staples of much electronic music, are 1-bit waveforms. Curiously enough, the TIA can't quite make 50% duty cycle square waves, but several close matches, like 15/31 That's all gobbledygook for all the OP cares. He wants to CONVERT .wav files to 1-bit form. Either he knows why he wants it, or he doesn't know what he wants. Either way, talk of TIA and PWM won't help him. Hey man, I'm just sticking up for 1-bit waveforms! -- different MP3 every day! http://gweep.net/~shifty/snackmaster . . . . . . . . ... . . . . . . "Maybe if you ever picked up a goddamn keyboard | Niente and compiler, you'd know yourself." -Matthew 7:1 | |
#35
|
|||
|
|||
1-Bit Wave File?
On 2004-05-19, Jerry Avins wrote:
Tachyon wrote: On 2004-05-18, Geoff Wood -nospam wrote: Tachyon wrote: I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. Fans of the Atari 2600 sound chip TIA beg to differ Each of its voices is capable of about 6 unique waveforms, each of which is a train of 0's and 1's. Additionally, square and PWM waveforms, staples of much electronic music, are 1-bit waveforms. Curiously enough, the TIA can't quite make 50% duty cycle square waves, but several close matches, like 15/31 That's all gobbledygook for all the OP cares. He wants to CONVERT .wav files to 1-bit form. Either he knows why he wants it, or he doesn't know what he wants. Either way, talk of TIA and PWM won't help him. Hey man, I'm just sticking up for 1-bit waveforms! -- different MP3 every day! http://gweep.net/~shifty/snackmaster . . . . . . . . ... . . . . . . "Maybe if you ever picked up a goddamn keyboard | Niente and compiler, you'd know yourself." -Matthew 7:1 | |
#36
|
|||
|
|||
1-Bit Wave File?
On 2004-05-19, Jerry Avins wrote:
Tachyon wrote: On 2004-05-18, Geoff Wood -nospam wrote: Tachyon wrote: I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. Fans of the Atari 2600 sound chip TIA beg to differ Each of its voices is capable of about 6 unique waveforms, each of which is a train of 0's and 1's. Additionally, square and PWM waveforms, staples of much electronic music, are 1-bit waveforms. Curiously enough, the TIA can't quite make 50% duty cycle square waves, but several close matches, like 15/31 That's all gobbledygook for all the OP cares. He wants to CONVERT .wav files to 1-bit form. Either he knows why he wants it, or he doesn't know what he wants. Either way, talk of TIA and PWM won't help him. Hey man, I'm just sticking up for 1-bit waveforms! -- different MP3 every day! http://gweep.net/~shifty/snackmaster . . . . . . . . ... . . . . . . "Maybe if you ever picked up a goddamn keyboard | Niente and compiler, you'd know yourself." -Matthew 7:1 | |
#37
|
|||
|
|||
1-Bit Wave File?
On 2004-05-19, Jerry Avins wrote:
Tachyon wrote: On 2004-05-18, Geoff Wood -nospam wrote: Tachyon wrote: I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." A little understanding can be a dangerous thing. With a 1 bit PCM data stream, there is effectively no recogisable signal. I think Randy may have been talking about bit-depths down to around 8 bits. However even this quanisation noise is not a type of distortion that is likely to sound in any way pleasant in pretty much any style of music. Fans of the Atari 2600 sound chip TIA beg to differ Each of its voices is capable of about 6 unique waveforms, each of which is a train of 0's and 1's. Additionally, square and PWM waveforms, staples of much electronic music, are 1-bit waveforms. Curiously enough, the TIA can't quite make 50% duty cycle square waves, but several close matches, like 15/31 That's all gobbledygook for all the OP cares. He wants to CONVERT .wav files to 1-bit form. Either he knows why he wants it, or he doesn't know what he wants. Either way, talk of TIA and PWM won't help him. Hey man, I'm just sticking up for 1-bit waveforms! -- different MP3 every day! http://gweep.net/~shifty/snackmaster . . . . . . . . ... . . . . . . "Maybe if you ever picked up a goddamn keyboard | Niente and compiler, you'd know yourself." -Matthew 7:1 | |
#38
|
|||
|
|||
1-Bit Wave File?
Tachyon shiftyATATATsidehack.sat.gweep.net writes:
[...] p.s. I found this link on Randy Yates' page about noise-shaping... http://home.earthlink.net/~yatescr/noiseb.ps I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." Hey Tachyon, So you're assuming that the OP wants to do this in order to implement some sort of musical effect? An interesting possibility. My question was intended to be taken at face value. I was asking about the OP's intention, not implying that one shouldn't do such a thing. My gut feeling is that he wanted to create a 1-bit delta sigma bitstream (which won't happen if you merely convert to a 1-bit stream), but I don't really know. That's why I asked. rock and roll, -N Hey Tachyon, nice screen name. I bet the Romulans don't like you too much, though... -- % Randy Yates % "The dreamer, the unwoken fool - %% Fuquay-Varina, NC % in dreams, no pain will kiss the brow..." %%% 919-577-9882 % %%%% % 'Eldorado Overture', *Eldorado*, ELO http://home.earthlink.net/~yatescr |
#39
|
|||
|
|||
1-Bit Wave File?
Tachyon shiftyATATATsidehack.sat.gweep.net writes:
[...] p.s. I found this link on Randy Yates' page about noise-shaping... http://home.earthlink.net/~yatescr/noiseb.ps I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." Hey Tachyon, So you're assuming that the OP wants to do this in order to implement some sort of musical effect? An interesting possibility. My question was intended to be taken at face value. I was asking about the OP's intention, not implying that one shouldn't do such a thing. My gut feeling is that he wanted to create a 1-bit delta sigma bitstream (which won't happen if you merely convert to a 1-bit stream), but I don't really know. That's why I asked. rock and roll, -N Hey Tachyon, nice screen name. I bet the Romulans don't like you too much, though... -- % Randy Yates % "The dreamer, the unwoken fool - %% Fuquay-Varina, NC % in dreams, no pain will kiss the brow..." %%% 919-577-9882 % %%%% % 'Eldorado Overture', *Eldorado*, ELO http://home.earthlink.net/~yatescr |
#40
|
|||
|
|||
1-Bit Wave File?
Tachyon shiftyATATATsidehack.sat.gweep.net writes:
[...] p.s. I found this link on Randy Yates' page about noise-shaping... http://home.earthlink.net/~yatescr/noiseb.ps I think a line from that paper may answer Randy's question about WHY you want to do this: "...quantisation of highly correlated signals (such as music) results in tonal distortion components being added to the signal." Hey Tachyon, So you're assuming that the OP wants to do this in order to implement some sort of musical effect? An interesting possibility. My question was intended to be taken at face value. I was asking about the OP's intention, not implying that one shouldn't do such a thing. My gut feeling is that he wanted to create a 1-bit delta sigma bitstream (which won't happen if you merely convert to a 1-bit stream), but I don't really know. That's why I asked. rock and roll, -N Hey Tachyon, nice screen name. I bet the Romulans don't like you too much, though... -- % Randy Yates % "The dreamer, the unwoken fool - %% Fuquay-Varina, NC % in dreams, no pain will kiss the brow..." %%% 919-577-9882 % %%%% % 'Eldorado Overture', *Eldorado*, ELO http://home.earthlink.net/~yatescr |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
AUDIO FILE EDIT: HELP PLS! | General | |||
What Software for Editing Sound on PC | Audio Opinions | |||
wave file to cd r | General | |||
wave file duration incorrect | Pro Audio | |||
unknown audio file format | General |