Home |
Search |
Today's Posts |
#1
Posted to rec.audio.marketplace
|
|||
|
|||
****SCHOEPS OWNERS STEP INSIDE*****
KC Stereo Mounts enable owners to accurately set up a stereo pair of
microphones while only having to use one shockmount: NOS 30cm 90 degrees DIN 20cm 90 degrees DINa 17cm 90 degrees ORTF 17cm 110 degrees ORTFw (wide) 25cm 110 degrees Vertical address with both 17cm and 20cm at 0 degrees MidSide at 0 degrees Omni with three openings: 20", 17", and 14" at 0 degrees If you are intersted, please email me at Louie.Liokis @ gmail.com make sure you state KC Mount in the subject line The hardest mount to make is the omni bar, so it went first to see if it was even possible. Looks like you can run 2 pairs of mics with no problem. I am going to sell them with a bag of washers to ensure a snug fit The V bar is going to look the same but just shorter and with holes drilled at 17 and 20 Pictures: OMNI http://i140.photobucket.com/albums/r...er/Omni002.jpg http://i140.photobucket.com/albums/r...er/Omni004.jpg http://i140.photobucket.com/albums/r...er/Omni014.jpg Update 2/4/09 The Vertical Address and M/S mounts are completed. http://i140.photobucket.com/albums/r...andMSMount.jpg with mics in MidSide - which does require rubber seals to make it tight. http://i140.photobucket.com/albums/r...KCMount004.jpg http://i140.photobucket.com/albums/r...KCMount009.jpg http://i140.photobucket.com/albums/r...KCMount010.jpg Vertical Address Bar 20CM http://i140.photobucket.com/albums/r...KCMount017.jpg 17CM http://i140.photobucket.com/albums/r...KCMount020.jpg |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
****SCHOEPS OWNERS STEP INSIDE***** | Pro Audio | |||
stupid question step up or step down? | Pro Audio | |||
To owners/previous owners of Celestion SL700s | High End Audio | |||
Step By Step Instructions For A Free Photo IPOD | Marketplace | |||
step by step photo guides | Car Audio |