Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to rec.audio.pro
ramtazz ramtazz is offline
external usenet poster
 
Posts: 38
Default Tascam DM-3200 Alesis HD-24 Bugs...

I've upgraded my mixer from a DM-4000 to a DM-3200. I was using a BRC
to control my HD24, upgraded the mixer and now when I have the brc on
it spits out all sorts of clicks on the first channel of the adat
group. Turn off the BRC and it goes away. I've tried INT clocking,
same thing.

I called Tascam.. they had no clue why it was doing that, and
suggested I use MMC and word clock and use the onboard machine
control.

While Im waiting for the wordclock cable to be delievered, anyone have
experience with this? I've configured the board so some of the MMC
functions work, rec, play, stop, manual location, arming recording
channel.

Im lead to believe that full MMC is possible once the wordclock is set
up. Is this true?

Thanks in Advance

Bill
Rampage Sound Studios
Lancaster, Pa
  #2   Report Post  
Posted to rec.audio.pro
Romeo Rondeau Romeo Rondeau is offline
external usenet poster
 
Posts: 484
Default Tascam DM-3200 Alesis HD-24 Bugs...

ramtazz wrote:
I've upgraded my mixer from a DM-4000 to a DM-3200. I was using a BRC
to control my HD24, upgraded the mixer and now when I have the brc on
it spits out all sorts of clicks on the first channel of the adat
group. Turn off the BRC and it goes away. I've tried INT clocking,
same thing.

I called Tascam.. they had no clue why it was doing that, and
suggested I use MMC and word clock and use the onboard machine
control.

While Im waiting for the wordclock cable to be delievered, anyone have
experience with this? I've configured the board so some of the MMC
functions work, rec, play, stop, manual location, arming recording
channel.

Im lead to believe that full MMC is possible once the wordclock is set
up. Is this true?


I would suggest using a wordclock connection from the either the BRC to
your mixer or the HD24 to your mixer and using the BRC to control the
HD24 with the ADAT sync connector. I don't believe that MMC will control
all of your channels track arming functions. I may be wrong, though. I
have never had much luck clocking devices with just an ADAT lightpipe,
as a rule I always use a wordclock connection in addition to the ADAT
connector and set the clock source accordingly.
  #3   Report Post  
Posted to rec.audio.pro
ramtazz ramtazz is offline
external usenet poster
 
Posts: 38
Default Tascam DM-3200 Alesis HD-24 Bugs...

On Thu, 22 Mar 2007 18:34:44 GMT, Romeo Rondeau
wrote:

ramtazz wrote:
I've upgraded my mixer from a DM-4000 to a DM-3200. I was using a BRC
to control my HD24, upgraded the mixer and now when I have the brc on
it spits out all sorts of clicks on the first channel of the adat
group. Turn off the BRC and it goes away. I've tried INT clocking,
same thing.

I called Tascam.. they had no clue why it was doing that, and
suggested I use MMC and word clock and use the onboard machine
control.

While Im waiting for the wordclock cable to be delievered, anyone have
experience with this? I've configured the board so some of the MMC
functions work, rec, play, stop, manual location, arming recording
channel.

Im lead to believe that full MMC is possible once the wordclock is set
up. Is this true?


I would suggest using a wordclock connection from the either the BRC to
your mixer or the HD24 to your mixer and using the BRC to control the
HD24 with the ADAT sync connector. I don't believe that MMC will control
all of your channels track arming functions. I may be wrong, though. I
have never had much luck clocking devices with just an ADAT lightpipe,
as a rule I always use a wordclock connection in addition to the ADAT
connector and set the clock source accordingly.


In the DM3200 under Clock, you can tell the DM3200 to arm all 24
channels or in various steps of channels. Problem is with the BRC
Channel one has all the time code in the 8 channel group. With the brc
off... it doesnt' show up, I just turn the bugger on.. and voila
noise. Does it with the DM3200 on internal clock and adat and slot
clocks.

I seem to recall awhile ago someone posting the same issue, but don't
recall the outcome. Would make sense to wordclock.. should give me
full closed mmc support, right now its open mmc without the clocking.

Two steps forward... one step back.

Bill
Rampage Sound Studios
Lancaster, Pa
Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tascam DM-3200 [email protected] Pro Audio 0 December 1st 05 09:43 AM
Tascam DM-3200 or O1V96 for ProTools Guitrzman Pro Audio 1 October 4th 05 08:10 PM
Tascam DM-3200 or O1V96 for Protools Guitrzman Audio Opinions 0 October 3rd 05 05:09 PM
jdf-amp hqs-3200 mono for sale 1piece 3200 watts in 1ohm [email protected] Pro Audio 0 July 14th 04 08:14 PM
jdf-amp hqs-3200 mono for sale 1piece 3200 watts in 1ohm [email protected] Pro Audio 0 July 14th 04 08:14 PM


All times are GMT +1. The time now is 10:34 AM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"