Home |
Search |
Today's Posts |
#1
Posted to rec.audio.pro
|
|||
|
|||
Emergency help with DEQ2496
I'm having problems getting my FBD to work on the DEQ. I go to the
second page, and set three parameters to "single" mode, in order for them to be able to learn the problematic frequencies. I then go to page 3 and go to run mode. At that time, the little "pause" icon to the left comes on, showing that the three parameters are ready to learn frequencies and suppress. I hit the learn mode button, and I can hear the clicking sound as the DEQ begins increasing gain. It will increase gain and start feeding back, to the point that I have to bring down the master. However, the frequencies never change on any of the three parameters. I don't have them locked, as I turned the "locked" icon off of each one. Any advice? Taylor |
#2
Posted to rec.audio.pro
|
|||
|
|||
Emergency help with DEQ2496
I got the problem solved...
|
#3
Posted to rec.audio.pro
|
|||
|
|||
Emergency help with DEQ2496
|
#4
Posted to rec.audio.pro
|
|||
|
|||
Emergency help with DEQ2496
wrote:
I got the problem solved... What was the fix? Curious minds and all... I really lke my DEQ2496's, but I never use the feedback destruction stuff. -- ha Iraq is Arabic for Vietnam |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
audio emergency preparedness kit | Pro Audio | |||
Emergency mic mount | Pro Audio | |||
Emergency Pinch Roller Help! | Pro Audio | |||
Emergency Pinch Roller Help! | Pro Audio | |||
Emergency help needed... | Pro Audio |