Home |
Search |
Today's Posts |
#1
Posted to rec.audio.tubes
|
|||
|
|||
814 like as triode?
Hi All:
Anyone knows the conditions of work of pentodo 814 like triode with grid grounded ? (for a a RF linear amplifier ) Thanks in advance Heriberto LU6DBU |
#2
Posted to rec.audio.tubes
|
|||
|
|||
814 like as triode?
Heriberto wrote: Hi All: Anyone knows the conditions of work of pentodo 814 like triode with grid grounded ? (for a a RF linear amplifier ) Thanks in advance Heriberto LU6DBU 814 data is at http://www.mif.pg.gda.pl/homepages/f.../049/8/814.pdf The G2 voltage determines Ia as does bias Vdc on g1. And g2 shouldn't be more than 400V. So you'd have to be careful that the Ea for triode isn't too high lest Pg2 exceed the 6.7 watts allowed. 814 has quite high Ea ratings, but these could not be used for triode. Grounded grid would also mean the cathode input impedance would be low. Ra will also be low, and affect the Q of the anode tank LC circuit. But you do get triode linearity for class AB. Patrick Turner. |
#3
Posted to rec.audio.tubes
|
|||
|
|||
814 like as triode?
Hi Patrick:-
Many Thanks for your help Regards Heriberto "Patrick Turner" escribió en el mensaje ... Heriberto wrote: Hi All: Anyone knows the conditions of work of pentodo 814 like triode with grid grounded ? (for a a RF linear amplifier ) Thanks in advance Heriberto LU6DBU 814 data is at http://www.mif.pg.gda.pl/homepages/f.../049/8/814.pdf The G2 voltage determines Ia as does bias Vdc on g1. And g2 shouldn't be more than 400V. So you'd have to be careful that the Ea for triode isn't too high lest Pg2 exceed the 6.7 watts allowed. 814 has quite high Ea ratings, but these could not be used for triode. Grounded grid would also mean the cathode input impedance would be low. Ra will also be low, and affect the Q of the anode tank LC circuit. But you do get triode linearity for class AB. Patrick Turner. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
The making of a triode | Vacuum Tubes | |||
There is no feedback in a triode | Vacuum Tubes | |||
Triode Feedback | Vacuum Tubes | |||
Using power triode or power pentode wired as a triode as a split-load phase splitter tube? | Vacuum Tubes | |||
Using power triode/pentode wired as triode as a split load phase splitter tube? | Vacuum Tubes |