Home |
Search |
Today's Posts |
#1
|
|||
|
|||
has anyone changed an ev644 connector?
|
#2
|
|||
|
|||
has anyone changed an ev644 connector?
i heard that a 4 pin can be replaced with an xlr. can anyone save me
from trial and error time? |
#4
|
|||
|
|||
has anyone changed an ev644 connector?
Phil Kile wrote in message . ..
On 8 Jul 2004 09:43:38 -0700, (Zoot) wrote: i heard that a 4 pin can be replaced with an xlr. can anyone save me from trial and error time? Yes they can. I have two of them. What is it you need to know? how to do it. just bought 2 on ebay. i do live recording . i prefer a 2 mike recording but sometimes i need more something [ usually piano or vibes] and would love to be able to just plug in an xlr cable and fix that without running wires through a club full of people. |
#5
|
|||
|
|||
has anyone changed an ev644 connector?
Zoot)wrote:
i heard that a 4 pin can be replaced with an xlr. can anyone save me from trial and error time? If you are asking about how to put a 3-pin male XLR on the mic, then this was made exactly for that purpose... http://www.switchcraft.com/products/connectors-22a.html Screws right over where the old connector was. Very slick. |
#6
|
|||
|
|||
has anyone changed an ev644 connector?
"Phil Kile" wrote ...
Do you have an aptitude for metal fabrication and access to basic tools? A standard XLR shell needs to be modified to be able to attatch it to the casting. Not necessary. Switchcraft L3MN is the off-the-shelf solution. http://www.switchcraft.com/products/connectors-22a.html |
#7
|
|||
|
|||
has anyone changed an ev644 connector?
On Fri, 9 Jul 2004 18:11:20 -0700, "Richard Crowley"
wrote: http://www.switchcraft.com/products/connectors-22a.htm Definitely a simpler solution. Wish I'd known about them a few years back. |
#8
|
|||
|
|||
has anyone changed an ev644 connector?
"Richard Crowley" wrote in message ...
Zoot)wrote: i heard that a 4 pin can be replaced with an xlr. can anyone save me from trial and error time? If you are asking about how to put a 3-pin male XLR on the mic, then this was made exactly for that purpose... http://www.switchcraft.com/products/connectors-22a.html Screws right over where the old connector was. very slick. i'm having trouble finding someone who will sell me just 2. |
#9
|
|||
|
|||
has anyone changed an ev644 connector?
In article ,
(Zoot) wrote: "Richard Crowley" wrote in message ... Zoot)wrote: i heard that a 4 pin can be replaced with an xlr. can anyone save me from trial and error time? If you are asking about how to put a 3-pin male XLR on the mic, then this was made exactly for that purpose... http://www.switchcraft.com/products/connectors-22a.html Screws right over where the old connector was. very slick. i'm having trouble finding someone who will sell me just 2. You can get L3MN adapters for $9.00 at http://www.fullcompass.com/specials/...005/index.html |
#11
|
|||
|
|||
has anyone changed an ev644 connector?
Phil Kile wrote in message
Do you have an aptitude for metal fabrication and access to basic tools? A standard XLR shell needs to be modified to be able to attatch it to the casting. yes but i think the guts from an xlr fit the casing o k. do you know how to hook up the wires? on the 4 pin it's white green red and yellow. the xlr has a 1 2 3 and one that connects to the casing. i think that's ground so it would be green. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Basic connector question | Tech | |||
Alpine molex connector 3523 | Car Audio | |||
Need 4 pin Mic connector Beyers M69 | Pro Audio |