Home |
Search |
Today's Posts |
#1
Posted to rec.audio.pro
|
|||
|
|||
Neumann M150 DIN plugs
Hi,
I need to fit new 8-pin DIN connectors to a Neumann M150 mic cable. Anyone know which off the shelf parts will fit/lock to the Mic/PSU correctly? Cheers, Gareth. |
#2
Posted to rec.audio.pro
|
|||
|
|||
Neumann M150 DIN plugs
gareth magennis wrote:
I need to fit new 8-pin DIN connectors to a Neumann M150 mic cable. Anyone know which off the shelf parts will fit/lock to the Mic/PSU correctly? You want an "8-pin tuchel" connector. Amphenol-Tuchel series C091A. Here is the male one, you want the female one I believe: http://www.mouser.com/Search/Product...GCTTlj4A%3d%3d --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#3
Posted to rec.audio.pro
|
|||
|
|||
Neumann M150 DIN plugs
On Thursday, January 5, 2017 at 2:00:52 PM UTC, Scott Dorsey wrote:
gareth magennis wrote: I need to fit new 8-pin DIN connectors to a Neumann M150 mic cable. Anyone know which off the shelf parts will fit/lock to the Mic/PSU correctly? You want an "8-pin tuchel" connector. Amphenol-Tuchel series C091A. Here is the male one, you want the female one I believe: http://www.mouser.com/Search/Product...GCTTlj4A%3d%3d --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." Thanks, Scott, actually I want both cable ends, and Farnell UK have both genders in stock. (Amphenol parts T 3504 001 and T 3505 001) Thanks very much, Gareth. |
#4
Posted to rec.audio.pro
|
|||
|
|||
Neumann M150 DIN plugs
gareth magennis wrote:
Thanks, Scott, actually I want both cable ends, and Farnell UK have both genders in stock. (Amphenol parts T 3504 001 and T 3505 001) ** Don't you need gold plated ones to go with that US$6500 mic ? ..... Phil |
#5
Posted to rec.audio.pro
|
|||
|
|||
Neumann M150 DIN plugs
Phil Allison schrieb:
gareth magennis wrote: Thanks, Scott, actually I want both cable ends, and Farnell UK have both genders in stock. (Amphenol parts T 3504 001 and T 3505 001) ** Don't you need gold plated ones to go with that US$6500 mic ? Maybe - but there's no money left ;-) SCNR Reinhard |
#6
Posted to rec.audio.pro
|
|||
|
|||
Neumann M150 DIN plugs
"Phil Allison" wrote in message ... gareth magennis wrote: Thanks, Scott, actually I want both cable ends, and Farnell UK have both genders in stock. (Amphenol parts T 3504 001 and T 3505 001) ** Don't you need gold plated ones to go with that US$6500 mic ? ..... Phil The originals are indeed gold plated. They also have a solder tag which solders the cable screen to both metal shrouds, as well as the Ground pin. The Amphenols don't have either. I'm not at all bothered by a lack of gold Bling, but I think I might now connect both housings to the cable screen, even though it might not be strictly necessary. This will, I believe, directly connect the Power supply chassis to the Mic chassis, though I suspect this is done internally via the ground pin anyway? I don't have the (expensive) Mic or Power Supply to try this out, just the cable. Gareth. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
RCA Phono plugs and Banana plugs locking | Audio Opinions | |||
Stereo Mini Plugs to RCA Plugs to Receiver Aux In-- Signal Degradation? | Tech | |||
316 GPO bantam plugs(not mIni plugs) | Pro Audio | |||
FS:Neumann M150 Tube mic | Marketplace | |||
"musician plugs" (ear plugs) - amazing! | Pro Audio |