Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1   Report Post  
Posted to rec.audio.tubes
patrick-turner patrick-turner is offline
external usenet poster
 
Posts: 119
Default Wien Bridge Oscilator, 1Hz to 1MHz.

Hi folks, people, demons and anyone else hangin around.
I have posted up another page for as 1/2 decent wien bridge oscilator which has 6 F ranges to give 1Hz to 1MHz. Instead of using potentiometers or tuning caps it has a two ganged wafer switches each with 12 pos x 1 pole to give relative F = 1, 1.2, 1.5, 2.0, 2.5, 3.2 3.9, 4.7, 5.6, 6.8, 8.2 and 10..0. These F appear at fairly evenly positioned points around a dial covering 360 degrees with 12 F marks.
A fairly decent Schmitt trigger square wave maker is included.
See
http://www.turneraudio.com.au/Wien-b...scillator.html

Address brick bats carefully, so I may return them with gusto and a better aim than yours !
Patrick Turner.
 
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Kikusui ORC-27A tubed oscilator mods. Patrick Turner Vacuum Tubes 2 February 17th 09 09:15 AM
Kikusui ORC-27A tubed oscilator mods. Patrick Turner Vacuum Tubes 3 February 16th 09 10:07 AM
Best op amp for wien bridge oscillator for highest BW. Patrick Turner Vacuum Tubes 8 February 10th 09 09:51 AM
Kauffrau Groß- und Außenhandel arbeitsplaetze deutschland stellenangebote wien stellenangebot industrie [email protected] Pro Audio 0 July 6th 08 02:30 PM


All times are GMT +1. The time now is 02:27 PM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"