I would like to find an easy source for rubber cleaner/rejuvinator for
cleaning things like pinch rollers on tape decks. Tascam used to sell a
roller cleaner which would clean but not dry out rubber rollers as alcohol
does.

Does anyone know of an easily obtainable product that can clean/rejuvinate
rubber pinch rollers?

Try M.G. Chemicals' Rubber Renue. "Rejuvinates and conditions rubber.
Excellent for use on rollers, belts, and platens.


"Rob" wrote in message
news:tOHzb.425030$Fm2.427804@attbi_s04...
I would like to find an easy source for rubber cleaner/rejuvinator for
cleaning things like pinch rollers on tape decks. Tascam used to sell a
roller cleaner which would clean but not dry out rubber rollers as alcohol
does.

Does anyone know of an easily obtainable product that can clean/rejuvinate
rubber pinch rollers?

i'll second this. i buy it from the local electronics store for $3.95/3.5oz.


cheers,
chris deckard



Try M.G. Chemicals' Rubber Renue. "Rejuvinates and conditions rubber.
Excellent for use on rollers, belts, and platens.


"Rob" wrote in message
news:tOHzb.425030$Fm2.427804@attbi_s04...
I would like to find an easy source for rubber cleaner/rejuvinator for
cleaning things like pinch rollers on tape decks. Tascam used to sell a
roller cleaner which would clean but not dry out rubber rollers as alcohol
does.

Does anyone know of an easily obtainable product that can clean/rejuvinate
rubber pinch rollers?

In article tOHzb.425030$Fm2.427804@attbi_s04, Rob wrote:
I would like to find an easy source for rubber cleaner/rejuvinator for
cleaning things like pinch rollers on tape decks. Tascam used to sell a
roller cleaner which would clean but not dry out rubber rollers as alcohol
does.

Do you want a cleaner or a rejuvenator? For what kind of rubber?

Does anyone know of an easily obtainable product that can clean/rejuvinate
rubber pinch rollers?

Methyl acetate will soften rollers a bit, as will Fedron, but once they
start to glaze, they are gone.

For cleaning, water, or water and a little Formula 409 is fine. If you
want to use the same cleaner on the heads and the roller, Head, Red, and
Roll cleaner from Precision Motor Works is some sort of halocarbon which
behaves pretty much the way old Freon TF did. It's a lot more expensive
than isopropanol, though.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

In article , Scott Dorsey
wrote:

Does anyone know of an easily obtainable product that can clean/rejuvinate
rubber pinch rollers?

Methyl acetate will soften rollers a bit, as will Fedron, but once they
start to glaze, they are gone.

For cleaning, water, or water and a little Formula 409 is fine. If you
want to use the same cleaner on the heads and the roller, Head, Red, and
Roll cleaner from Precision Motor Works is some sort of halocarbon which
behaves pretty much the way old Freon TF did. It's a lot more expensive
than isopropanol, though.


I don't know about rejuvinating but I use the "Head, Red, and Roll"
cleaner from Precision Motor Works on my rollers, isopropal on the
heads and tape path.


http://precisionmotorworks.com/products.htm down near the bottom links
a pdf on the product.



David Correia
Celebration Sound
Warren, Rhode Island


www.CelebrationSound.com

In article ,
david wrote:
In article , Scott Dorsey
wrote:

Does anyone know of an easily obtainable product that can clean/rejuvinate
rubber pinch rollers?

Methyl acetate will soften rollers a bit, as will Fedron, but once they
start to glaze, they are gone.

For cleaning, water, or water and a little Formula 409 is fine. If you
want to use the same cleaner on the heads and the roller, Head, Red, and
Roll cleaner from Precision Motor Works is some sort of halocarbon which
behaves pretty much the way old Freon TF did. It's a lot more expensive
than isopropanol, though.

I don't know about rejuvinating but I use the "Head, Red, and Roll"
cleaner from Precision Motor Works on my rollers, isopropal on the
heads and tape path.

Try it on the heads and tape path too! It gets gunk off with less elbow
grease than isopropanol. Way more money, though.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."

Anyone ever use Nortronics QM108? "Specially formulated to clean
magnetic heads, pinch rollers, and capstans." I bought two 8oz. cans
of it in 1984 & STILL have some left! That's been my go-to goo for
rubber rollers & all tape path components, never had a problem with
it...but have rarely seen anyone else use it.


(Scott Dorsey) wrote in message ...
In article ,
david wrote:
In article , Scott Dorsey
wrote:

Does anyone know of an easily obtainable product that can clean/rejuvinate
rubber pinch rollers?

Methyl acetate will soften rollers a bit, as will Fedron, but once they
start to glaze, they are gone.

For cleaning, water, or water and a little Formula 409 is fine. If you
want to use the same cleaner on the heads and the roller, Head, Red, and
Roll cleaner from Precision Motor Works is some sort of halocarbon which
behaves pretty much the way old Freon TF did. It's a lot more expensive
than isopropanol, though.

I don't know about rejuvinating but I use the "Head, Red, and Roll"
cleaner from Precision Motor Works on my rollers, isopropal on the
heads and tape path.

Try it on the heads and tape path too! It gets gunk off with less elbow
grease than isopropanol. Way more money, though.
--scott

Buster Mudd wrote:
Anyone ever use Nortronics QM108? "Specially formulated to clean
magnetic heads, pinch rollers, and capstans." I bought two 8oz. cans
of it in 1984 & STILL have some left! That's been my go-to goo for
rubber rollers & all tape path components, never had a problem with
it...but have rarely seen anyone else use it.

It's just TF. Hold on to it.
--scott

--
"C'est un Nagra. C'est suisse, et tres, tres precis."