Home |
Search |
Today's Posts |
#1
Posted to rec.audio.pro
|
|||
|
|||
Roland 2480, how to get out of "solo-mode"...?
I don't knw how I had turned on permanently "solo-mode". On the top of the screen the text "solo" blinks all the time. So, now I can't listen channels without pushing the "solo" on in every channels which I'd like to listen. Also I can't use loop-effect without the pushing "solo" on in every channel effect-box. How can I reset the solo-mode. Here you can read the part of manual. The "hold down CLEAR and press IN 1-16•SOLO" doesn't work. What went wrong...? -Pentti ................................. "Soloing Channels in Solo Mode 1. While holding down SHIFT, press IN 1-16•SOLO. The channel strips’ SELECT buttons flash. When a channel strip’s SELECT button is flashing, its signal is not currently soloed. 2. Press the desired FADER button to select the set of channels containing the channel you wish to solo. 3. Press the desired channel’s SELECT button—it lights solidly to show the channel is now soloed, and all other channels are temporarily silenced. You can solo as many channels as you like. 4. To un-solo a channel, press its SELECT button again. It flashes to show that the channel’s no longer soloed. 5. To exit Solo mode, hold down SHIFT and press IN 1-16•SOLO. Automix can record and play back the muting and un-muting of channels. To un-mute all currently muted channels, hold down CLEAR and press IN 17-24/AUX MST•MUTE. To un-solo all currently soloed channels, hold down CLEAR and press IN 1-16•SOLO." ....................... |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Alan Dower Blumlein "garter" circuits now in triode mode EL34 P-P amp | Vacuum Tubes | |||
SA-DX1040 Technics Receiver switching to "Protected Mode" | Tech | |||
"AKAI", "KURZWEIL", "ROLAND", DVDs and CDs | Audio Opinions |