Reply
 
Thread Tools Display Modes
  #1   Report Post  
blah
 
Posts: n/a
Default Carver HR-895

I had this unit repaired 2 years ago it was turning off by itself and
sometimes would not power up at all ,the tech said it was a sticky
power switch that he just cleaned not replaced , Now its doing the
same thing (warr. is out) looks easy to replace so where can I get
replacement parts for this unit

Thanks
  #2   Report Post  
Scott Dorsey
 
Posts: n/a
Default

In article ,
blah wrote:
I had this unit repaired 2 years ago it was turning off by itself and
sometimes would not power up at all ,the tech said it was a sticky
power switch that he just cleaned not replaced , Now its doing the
same thing (warr. is out) looks easy to replace so where can I get
replacement parts for this unit


You _might_ be able to get them from what is left of Carver. Otherwise
you are stuck trying to figure out who made the switch and seeing if it
is a standard item with them.

Or, you might be able to just jumper across the switch and have it always
on. If you're powering the system from a power sequencer or a power strip,
that's probably a better route anyway.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."
  #3   Report Post  
Scott Dorsey
 
Posts: n/a
Default

In article ,
blah wrote:
I had this unit repaired 2 years ago it was turning off by itself and
sometimes would not power up at all ,the tech said it was a sticky
power switch that he just cleaned not replaced , Now its doing the
same thing (warr. is out) looks easy to replace so where can I get
replacement parts for this unit


You _might_ be able to get them from what is left of Carver. Otherwise
you are stuck trying to figure out who made the switch and seeing if it
is a standard item with them.

Or, you might be able to just jumper across the switch and have it always
on. If you're powering the system from a power sequencer or a power strip,
that's probably a better route anyway.
--scott
--
"C'est un Nagra. C'est suisse, et tres, tres precis."
Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
FA: Carver TX-8R (TX8R) AM/FM Tuner Dean Marketplace 0 April 23rd 04 04:03 AM
FA: Carver TX-8R (TX8R) AM/FM Tuner Dean Marketplace 0 April 23rd 04 04:03 AM
FA: Carver DPL-20 (DPL20) Dolby Pro-Logic Processor Dean Marketplace 0 April 23rd 04 04:02 AM
FA: Carver DPL-20 (DPL20) Dolby Pro-Logic Processor Dean Marketplace 0 April 23rd 04 04:02 AM
FA: Carver C-1 preamp Dean Marketplace 0 April 23rd 04 04:00 AM


All times are GMT +1. The time now is 05:51 PM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"