Home |
Search |
Today's Posts |
#1
Posted to rec.audio.tech
|
|||
|
|||
Waveguides on any driver.
Thought this site was a joke when I saw the banner on another site.
http://www.mihorn.com/ It drips personality though. -- Cyrus *coughcasaucedoprodigynetcough* |
#2
Posted to rec.audio.tech
|
|||
|
|||
Waveguides on any driver.
That's about a guaranteed way to screw up the frequency response of any
speaker! If you put a horn in front of a tweeter that wasn't designed for it, you will alter the efficiency of the driver in a way that is not easily predictable. The idea that a generic set of horns could be made to fit any tweeter or 6 or 8 inch driver is absolutely ridiculous! "Cyrus" wrote in message ... Thought this site was a joke when I saw the banner on another site. http://www.mihorn.com/ It drips personality though. -- Cyrus *coughcasaucedoprodigynetcough* |
#3
Posted to rec.audio.tech
|
|||
|
|||
Waveguides on any driver.
"James Lehman" wrote in message . .. That's about a guaranteed way to screw up the frequency response of any speaker! If you put a horn in front of a tweeter that wasn't designed for it, you will alter the efficiency of the driver in a way that is not easily predictable. The idea that a generic set of horns could be made to fit any tweeter or 6 or 8 inch driver is absolutely ridiculous! Agreed, so they should find a huge market then :-) MrT. |
#4
Posted to rec.audio.tech
|
|||
|
|||
Waveguides on any driver.
Yup!
Ordered mine yesterday! ~NOT~ James. ) "Mr.T" MrT@home wrote in message u... "James Lehman" wrote in message . .. That's about a guaranteed way to screw up the frequency response of any speaker! If you put a horn in front of a tweeter that wasn't designed for it, you will alter the efficiency of the driver in a way that is not easily predictable. The idea that a generic set of horns could be made to fit any tweeter or 6 or 8 inch driver is absolutely ridiculous! Agreed, so they should find a huge market then :-) MrT. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Vintage tube equipment for sale | Vacuum Tubes | |||
Question for the Ferstlerian | Audio Opinions | |||
Driver Design - What makes a good driver | Tech | |||
What do you prefer in your 300B SE? | Vacuum Tubes | |||
Doppler Distortion - Fact or Fiction | Pro Audio |