| Home |
| Search |
| Today's Posts |
|
#1
Posted to comp.dsp,rec.audio.tech,sci.electronics.design
|
|||
|
|||
THD+N, Dynamic Range, Noise floor
I am trying to build a USB sound card and trying to finalize the
specs. It will have USB to I2S converter (part of PCM2706) connected to DAC. Since PCM2706 is only doing USB to I2S format conversion, samples (WAV) and sample rate (16 bit, 48Khz) remain unchanged. Shall I safely take that PCM2706 USB-I2S conversion will not alter the following parameters before passing the digital audio to the DAC. (assuming no jitter) THD+N Noise Floor Dynamic Range SNR Thanks -m |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Dynamic range of LPs | High End Audio | |||
| 130 dB dynamic range (not 150) | Pro Audio | |||
| Dynamic range - this is how to do it | Pro Audio | |||
| DBX 228 NR / Dynamic Range Expander | Marketplace | |||
Threaded Mode