Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Cabinet PLans
JBL, Altec and EV, at the very least used to have available plans for a
wide variety of cabinets, designed around their drivers. Does anyone know where these can be found, preferably online? In particular, either EV or JBL had one for a 1x12" cabinet barely bigger than the driver, and containing around a cubic foot of air. It was intened for guitar applications. ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups ---= East/West-Coast Server Farms - Total Privacy via Encryption =--- |
#2
|
|||
|
|||
In article ,
Patrick Covert wrote: JBL, Altec and EV, at the very least used to have available plans for a wide variety of cabinets, designed around their drivers. Does anyone know where these can be found, preferably online? In particular, either EV or JBL had one for a 1x12" cabinet barely bigger than the driver, and containing around a cubic foot of air. It was intened for guitar applications. Try http://www.jblpro.com/pages/tech_lib.htm or a search for EV resulted in: .. Details on vented box design, construction and equalization may be obtained from Electro- Voice by requesting łTL806 Builders Plans (Form 1544-523). I don't know if that is current, but it's worth a shot. I have a pair of cabinets like this built by Joe's Speaker and Salami in NJ from the 80s. Edwin |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FS: vintage audio cabinet | Marketplace | |||
McIntosh Cabinet MX 110 | Marketplace | |||
Realistic STA-64B Receiver with Walnut Cabinet | Marketplace | |||
Marantz 10b Cabinet Needed. | Marketplace | |||
Marantz Walnut Cabinet, fits most receivers, Minty! | Marketplace |