Reply
 
Thread Tools Display Modes
  #1   Report Post  
Wayne
 
Posts: n/a
Default Complete Rebuild of a Deluxe Reverb Reissue Amplifier - (story, review, website)

Announcing my new website, which thoroughly documents the rebuilding of a
Fender Deluxe Reverb Reissue (DRRI) amplifier (or how I spent my summer
vacation :)

http://www.waynereno.com/

I've had quite a few DRRI's over the years and have followed with interest
the postings of MikeyMann (aka Mike McGuirk) who has been a proponent of
stripping out the guts of the Fender reissue amps and rebuilding a new amp
inside the reissue chassis. Cool idea. Guess what? I decided to get in
touch with Mikey and I ended up taking my DRRI to him for a complete
rebuild.

Right at the beginning, he snapped some digital photos and emailed them to
me so I could see his progress. I'd planned on keeping these for
documentation but then I started writing about each step of the process.
This prompted me to ask Mikey more questions and request more photos. My
"story" about the amp rebuild kept getting longer.

After a couple of weeks, I'd already written about 15 pages (with pictures).
Mikey and I started having almost daily interactions, mostly by email but
often by phone. I could see Mikey was taking his time to do everything
absolutely top-notch using the best components. For example, my amp will
have a Mercury Magnetics power transformer, choke, reverb transformer and
output transformer.

Since Mikey was being so meticulous with rebuilding the amp, I decided to be
equally meticulous about documenting the process. When you look at the site
you may think I've gone a tad overboard. LOL. As a point of reference, I'd
taken the summer off from my grad classes and I ended up applying the same
(or more) energy into this project.

I've been playing guitar since 1966 and have played in a ton of bands over
the years. In fact, I had a gig yesterday. The first amp I bought in 1967
was an Ampeg Gemini I and I've been using tube amps ever since.

Somewhere along the way, I decided to start educating myself about tube amp
theory and construction. I'm still just a hobbyist in this regard but this
knowledge certainly helped me write this article. In fact, writing the
article pushed me beyond the bounds of my tube amp knowledge and forced me
to get a handle on concepts I hadn't mastered. I try to relay this sense of
discovery in the article as I take you chronologically through the building
process.

Mikey has been just great about helping me out. You'd be amazed at how many
photos he took of each step of the construction so I could have my pick of
photos for the article. He also patiently answered all of my questions,
which I surely appreciated. Wait until you see the quality of work that
went into this amp!

About a month before picking up my amp, I decided to take the article I was
writing and turn it into a full-blown website, which is where the link
points you. This was a BIG project. It's one thing creating an article
using Microsoft Word but it's another level of effort to turn it into a
website. I hope you enjoy it because I've certainly tried to make it as
nice looking and informative as possible.

Of course, part of the story is about how the amp works, how it sounds, how
it feels and how it plays. In short, it does all of things just great.
Mikey has a cool market niche with rebuilding reissue amps using hand-wired
turret board construction and great components. I've been to his shop
twice (so far) and he's got all the tools and parts needed to rebuild
various Fender amps.

He's also got the ears to dial-in great tones. In my case, I now have a
Deluxe Reverb that is built better than an original and which sounds every
bit as good, if not better. There are even some mods he added for me, like
external bias test points and a Triode/Pentode switch. And all this for a
price I could afford. It's pretty cool. You'll have to check it out so
here's the link again, for convenience.

http://www.waynereno.com/

Let me know what you think.

Thanks,

Wayne


Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
rec.audio.car FAQ (Part 2/5) Ian D. Bjorhovde Car Audio 0 March 6th 04 07:54 AM
Audio amplifier design trivial? John Atkinson Audio Opinions 166 November 14th 03 08:34 PM


All times are GMT +1. The time now is 11:36 PM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"