Reply
 
Thread Tools Display Modes
  #1   Report Post  
mpmsa7
 
Posts: n/a
Default Tweeter power

I have a woofer driver MONACOR SPH-225 with rated power 100W rms, 8
ohms, SPL 90dB. I'd like to build 2-way system with crossover frequency
at about 2 kHz, so I want to know,how much minimal rated power (RMS) do
I need for tweeter.

  #2   Report Post  
mpmsa7
 
Posts: n/a
Default

however this dish is classically
made with crawfish).

Stuffed infant heads, stuffed crawfish heads, stuffed crab or lobster shells;
make patties if shell or head is not available
(such as with packaged crawfish, crab, or headless baby).
Flour
oil
onions
bell peppers
garlic salt, pepper, etc.
3 cups chicken stock
2 sticks butter
3 tablespoons oil

First stuff the heads, or make the patties (see index)
then fry or bake.
Set aside to drain on paper towels.
Make a roux with butter, oil and flour,
brown vegetables in the roux, then add chicken stock and
allow to simmer for 20 minutes.
Add the patties or stuffed heads, and some loose crawfish,
lobster, long piglet, or what have you.
Cook on low for 15 minutes, then allow it to set for at least
15 minutes more.
Serve over steamed rice; this dish is very impressive!



Stuffed Cabbage Rolls

Babies really can be found under a cabbage leaf -
or one can arrange for ground beef to be found there instead.

8 large cabbage leaves
1 lb. lean ground newborn human filets, or ground chuck
Onions
peppers
celery
garlic
soy sauce
salt pepper, etc
Olive oil
breadcrumbs
Tomato Gravy (see index)

Boil the cabbage leaves for 2 minutes to soften.
In skillet, brown the meat in a little olive oil,
then add onions, peppers, and celery (all chopped finely)
and season well.
Place in a large bowl and cool.
Add seasoned breadcrumbs and a little of the tomato gravy,
enough to make the mixture pliable.
Divide the stuffing among the cabbage leaves then roll.
Place seam down in a baking pan.
Ladle tomato gravy on top,
and bake at 325° for 30 - 45 minutes.



Umbilical Cordon Bleu

Nothing


  #3   Report Post  
Kevin McMurtrie
 
Posts: n/a
Default

In article . com,
"mpmsa7" wrote:

I have a woofer driver MONACOR SPH-225 with rated power 100W rms, 8
ohms, SPL 90dB. I'd like to build 2-way system with crossover frequency
at about 2 kHz, so I want to know,how much minimal rated power (RMS) do
I need for tweeter.


Not much, maybe 10 to 20 Watts for 2Khz on up. It depends on the kind
of music you listen to. Some mid/tweeters also have power handling
ratings based on the total speaker system power.
  #4   Report Post  
Kevin McMurtrie
 
Posts: n/a
Default

seal for
a few minutes.
Fry the rolls:
325° if using egg roll wraps, 350° for spring roll wraps.
Deep fry in peanut oil till crispy golden brown, drain on paper towels.



Lemon Neonate

Turkey serves just as well, and in fact even looks a bit like a
well-dressed baby. By the time you turn the child?s breast into
cutlets, it will be indistinguishable. The taste of young human,
although similar to turkey (and chicken) often can be wildly
different depending upon what he or she has consumed during its
10 to 14 months of life...

4 well chosen cutlets (from the breasts of 2 healthy neonates)
2 large lemons (fresh lemons always, if possible)
Olive oil
Green onions
Salt
pepper
cornstarch
neonate stock (chicken, or turkey stock is fine)
garlic
parsley
fresh cracked black pepper

Season and sauté the cutlets in olive oil till golden brown, remove.
Add the garlic and onions and cook down a bit.
Add some lemon juice and some zest, then de-glaze with stock.
Add a little cornstarch (dissolved in cold water) to the sauce.
You are just about there, Pour the sauce over the cutlets,
top with parsley, lemon slices and cracked pepper.
Serve with spinach salad, macaroni and cheese (homemade) and iced tea...



Spaghetti with Real Italian Meatballs

If you don?t have an expendable bambino on hand,
you can use a pound of ground pork instead.
The secret to great meatballs, is to use very lean meat.

1 lb. ground flesh; human or pork
3 lb. ground


Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help needed: Inserting Phantom Power between 2 XLR connectors Witek Tech 16 March 16th 04 10:32 AM
AC Power Conditioner (Cont.) Martin Glasband High End Audio 0 December 24th 03 08:11 PM
FS: SOUNDSTREAM CLOSEOUTS AND MORE!! Nexxon Car Audio 0 November 21st 03 02:59 AM
Power consumption of spkr components ab Tech 24 November 12th 03 06:21 AM
EASY way to power tube audio projects OvrReactor Marketplace 0 September 2nd 03 10:27 PM


All times are GMT +1. The time now is 04:28 AM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"