Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Studer A80 Light Bulbs
Hey All, do you know where I can get some lightbulbs for a Studer
A80?? I need 32 of the small ones in the penthouse for the "arm" and rec" lights and 16 for behind the VU meters. Do you know of any "digikey" or off the shelf products that can be ordered at a much lower cost? let me know! Tony Kuzub www.highvoltagerecording.com |
#2
|
|||
|
|||
In article ,
high Voltage Recording wrote: Hey All, do you know where I can get some lightbulbs for a Studer A80?? I need 32 of the small ones in the penthouse for the "arm" and rec" lights and 16 for behind the VU meters. Do you know of any "digikey" or off the shelf products that can be ordered at a much lower cost? These are the crimped-base bulbs? I believe these are the same lamps that the Thorens turntables use and that the Revox A77 uses. Digi-Key sells a lamp from Chicago Miniature that looks like the right thing, but the base is just a tiny bit too large to fit. These lamps turn up in so much European gear that there _has_ to be an inexpensive supplier in Europe somewhere, but I haven't found it. If you do, please let me know because I'll go in on an order with you. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
#3
|
|||
|
|||
yeah these little buggers are super tiny!! smaller then an average
Xmas bulb...maybe 1/2 the size. they arent crimped they have no legs or mounting points it fits into a socket held by a spring with a lenze in the front. they say 24VA34. I was thinking about putting in an LED to replace them, but i dont think i have the room to do the mod...without ripping each module apart. as for the VU meter they say 24V40mA and have 2 indexing points so you can slide them into the mounting plate. any help would be awesome thanks guys Tony Kuzub www.HighVoltageRecording.com |
#5
|
|||
|
|||
"high Voltage Recording" wrote in message om... Hey All, do you know where I can get some lightbulbs for a Studer A80?? I'm pretty sure you can get these from most major suppliers, or at least bulbs that will fit. (may be brighter or darker than the originals) Try this: http://uk.farnell.com/jsp/endecaSear...&Ntk=gensearch Can't remember what type of bulbs they are, but if you just search for "Filament Lamps" it comes up with hundreds of them. It should help you identify the right fitting anyway. Gareth. |
#6
|
|||
|
|||
high Voltage Recording wrote:
yeah these little buggers are super tiny!! smaller then an average Xmas bulb...maybe 1/2 the size. they arent crimped they have no legs or mounting points it fits into a socket held by a spring with a lenze in the front. Right, they have a crimped glass base with the wires twisted to be contacts? they say 24VA34. I was thinking about putting in an LED to replace them, but i dont think i have the room to do the mod...without ripping each module apart. The guys that make LED replacement gadgets might actually have something for these. It's worth calling Harris-Allied to see. That number just says that the lamps are 24V and not much else. as for the VU meter they say 24V40mA and have 2 indexing points so you can slide them into the mounting plate. That's just 24 volts, 40 milliamps, no other info. But knowing the mA rating at least lets you know how much current was budgeted to run them. --scott -- "C'est un Nagra. C'est suisse, et tres, tres precis." |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FA: Neve EQ & Modules, Studer Parts, Cables, Mike Accessories, More | Pro Audio | |||
FA: Neve EQ & Modules, Studer Parts, Cables, Mike Accessories, More | Pro Audio | |||
FA: Studer, Neve, Dolby Parts, Mic Stand Hardware, Cables, Much more | Pro Audio | |||
FA: Studer, Neve, Dolby Parts, Mic Stand Hardware, Cables, Much more | Pro Audio |