Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Remote Turn On - Low Voltage Trigger Problems
I was setting up my amp today, using a low voltage trigger (PAC TR-7) off of one of the speaker wires that was running into the amp and whenever I turn my volume close to halfway, the amp would shut off. I removed the trigger and looped a remote lead to a constant 12v source and it worked fine. The problem is definitely something with the trigger or it's setup. I also tried to change the ground on the trigger but no luck. Not sure what my next step would be since I don't know if it is a bad trigger, or something with the setup or what. Ideas? -- jiffy ------------------------------------------------------------------------ jiffy's Profile: http://www.caraudioforum.com/vbb3/me...p?userid=33416 View this thread: http://www.caraudioforum.com/vbb3/sh...d.php?t=216358 CarAudioForum.com - Usenet Gateway w/over one million posts online! |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Output transformer question | Vacuum Tubes | |||
Improved AM Detector | Vacuum Tubes | |||
Strange voltage drop on remote turn-on wire | Car Audio | |||
rec.audio.car FAQ (Part 4/5) | Car Audio | |||
rec.audio.car FAQ (Part 1/5) | Car Audio |