Home |
Search |
Today's Posts |
#2
Posted to rec.audio.tubes
|
|||
|
|||
dynaco driver board
http://www.curcioaudio.com/dynadr_3.htm . scroll down to "Stereo 70 Driver
Board (7199 board) Replacement Modules" http://www.dynakitparts.com/store/product.aspx?id=19 |
#3
Posted to rec.audio.tubes
|
|||
|
|||
dynaco driver board
On Jun 5, 6:35 am, François Yves Le Gal wrote:
IMO using a vintage replica - even using high quality parts - will give less satisfying results than using a modern (read 3 tubes) version, such as the one offered by uncle Ned at TubeZone (http://store01.prostores.com/servlet...naco-Dynakit-S...) Exactly that... However, having a "classic" ST-70 in full-factory dress (but with good quality, upgraded parts, properly biased and with good tubes) is an excellent base-amp for experimentation with any of dozens of variations, upgrades and alternate modes, an education in itself. They are common enough and cheap enough (with patience) that having that one unit as-designed and another for experimentation is incredibly useful. Peter Wieck Wyncote, PA |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
McIntosh Driver Board Transistor Replacement | Tech | |||
FA:Re-cap, Re-tube, new board kit for Dynaco ST70, & other stuff | Vacuum Tubes | |||
FS: Dynaco ST70 dual monoblocked w/Sutherland Driver board and individualbias adj. | Marketplace | |||
WTB: Dynaco ST-70 board | Vacuum Tubes | |||
Dynaco PC-36 board | Tech |