Home |
Search |
Today's Posts |
|
#1
|
|||
|
|||
stancor pc-8412 transformer spec
I can't find this online, I was hoping that someone has a copy, just interested in the current and voltage rating. Thanks Scott |
#2
|
|||
|
|||
Hi:
goto alt.binaries.pictures.radio for image of label with lead color code -- Steve "scottp" wrote in message ... I can't find this online, I was hoping that someone has a copy, just interested in the current and voltage rating. Thanks Scott |
#3
|
|||
|
|||
PC-8412
Plate Winding: A.C.Volts = 400-0-400, DCMA = 200 Rectifier Fila.: Volts = 5.0, Amps = 3.0 Other Windings: Volts = 6.3 C.T., Amps = 5.0. These specs straight from the catalog - sometimes it pays to be a pack rat! Regards ww scottp wrote: I can't find this online, I was hoping that someone has a copy, just interested in the current and voltage rating. Thanks Scott |
#4
|
|||
|
|||
Thankyou very much. This really helps out!
Scott Wm.M.Chiaramonte wrote: PC-8412 Plate Winding: A.C.Volts = 400-0-400, DCMA = 200 Rectifier Fila.: Volts = 5.0, Amps = 3.0 Other Windings: Volts = 6.3 C.T., Amps = 5.0. These specs straight from the catalog - sometimes it pays to be a pack rat! Regards ww scottp wrote: I can't find this online, I was hoping that someone has a copy, just interested in the current and voltage rating. Thanks Scott |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
replacing the Oktava ML52 transformer -- some measurements | Pro Audio | |||
replacing the Oktava ML52 transformer -- some measurements | Pro Audio | |||
Run Rabbit Run | Vacuum Tubes | |||
Question about Low DCR power transformer for filament supply | Vacuum Tubes |