Home |
Search |
Today's Posts |
#1
Posted to rec.audio.pro
|
|||
|
|||
stereo TRS to 2 XLRs, having trouble
i'm making a y cable. it is a stereo TRS unbalanced (T-left R-right)
to 2 XLR'S. the shield wire from the TRS splits to go to pin 1 of each XLR. should i connect the signal wire (T and R) to pin 2 on the respective XLR connectors and put a jumper between pins 1 and 3 of each XLR connector? i want to make sure i'm doing this right.. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
HT with hi end stereo | High End Audio | |||
Multiplex decoder nearly rewired. | Vacuum Tubes | |||
Stereo graphic eq plugin | Pro Audio | |||
No stereo separation in Suburbans 2003-2004, plus other GM vehicles! Check for yourself. | Car Audio | |||
Unusual Case - Connecting pc to stereo help please! | Tech |