[Rick Yerke[_2_]]

I recently found a nice Acrosound Ultra-Linear II mono amp that needs
repair.Does anybody have the schematic and operating instructions for this
amp.Thanks Rick

[Jon Yaeger]

in article , Bret Ludwig
at wrote on 7/31/07 6:03 PM:

On Jul 29, 11:13 pm, (Rick Yerke) wrote:
I recently found a nice Acrosound Ultra-Linear II mono amp that needs
repair.Does anybody have the schematic and operating instructions for this
amp.Thanks Rick

As it happens we were discussing this amp. I can't find anything
online. IIRC it is a generic Williamson but I can't be sure.



I have info on it, but it is not scanned.

[Chris Hornbeck]

On Wed, 01 Aug 2007 00:08:03 -0400, Jon Yaeger
wrote:

I recently found a nice Acrosound Ultra-Linear II mono amp that needs
repair.Does anybody have the schematic and operating instructions for this
amp.Thanks Rick

As it happens we were discussing this amp. I can't find anything
online. IIRC it is a generic Williamson but I can't be sure.

I have info on it, but it is not scanned.

It's on the tip of everybody's tongue. I can (more-or-less,
downhill-with-a-tailwind) remember having a schematic here
somewhere, and my memory is like Bret's, a standard
Williamson. FWIW, (not much). Any pointers?

A schematic is easily, and most believably, generated from
the device at hand, and there ain't no such critters as
"operating instructions" way back before the liability lawyer
era.

Thanks, as always,

Chris Hornbeck
"I would much rather be able to say it sounds like such and such, but
when it's not obvious distortion and/or noise, when the specs are really
good for those factors and IM and slew rate and a host of other stuff I
probably can't bring to consciousness right now, yet one preamp lets me
hear as if the source is alive and right there, and the next one makes
me feel as if I'm listening to the equivalent of a very detailed
cardboard Elvis, I don't know what words to offer that might help. But
hell, I'm willing to try. Everything we might like to know isn't known
yet, and through history people have come up with ways to measure stuff
that previously went unmeasured." - Hank Alrich 07 May 2005

[Rick Yerke[_2_]]

In article , Jon Yaeger wrote:
in article , Bret Ludwig
at wrote on 7/31/07 6:03 PM:

On Jul 29, 11:13 pm, (Rick Yerke) wrote:
I recently found a nice Acrosound Ultra-Linear II mono amp that needs
repair.Does anybody have the schematic and operating instructions for this
amp.Thanks Rick

As it happens we were discussing this amp. I can't find anything
online. IIRC it is a generic Williamson but I can't be sure.



I have info on it, but it is not scanned.

If you ever do get it scanned i would appreciate any info.I believe these were
kits and there are severals pots (bias-Balance) that have to be adjusted
correctly.Rick

[Jon Yaeger]

in article , Rick Yerke at
wrote on 8/2/07 1:12 AM:

In article , Jon Yaeger
wrote:
in article , Bret Ludwig
at wrote on 7/31/07 6:03 PM:

On Jul 29, 11:13 pm, (Rick Yerke) wrote:
I recently found a nice Acrosound Ultra-Linear II mono amp that needs
repair.Does anybody have the schematic and operating instructions for this
amp.Thanks Rick

As it happens we were discussing this amp. I can't find anything
online. IIRC it is a generic Williamson but I can't be sure.



I have info on it, but it is not scanned.

If you ever do get it scanned i would appreciate any info.I believe these were
kits and there are severals pots (bias-Balance) that have to be adjusted
correctly.Rick


E-mail me your postal address and I'll make a copy for you. My chances of
getting around to scanning this document are less than NEVER.

Jon