Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #8   Report Post  
Posted to rec.audio.pro
Paul[_13_] Paul[_13_] is offline
external usenet poster
 
Posts: 871
Default Does Anyone have a Schematic for a Sound City Joanna PianoKeyboard?

On 5/14/2019 10:52 PM, Paul wrote:
On 5/13/2019 10:53 PM, Paul wrote:
On 5/13/2019 1:00 PM, Paul wrote:
On 5/13/2019 8:45 AM, ChrisG wrote:
On 5/13/2019 6:03 AM, Paul wrote:
On 5/13/2019 3:48 AM, Paul wrote:
On 5/12/2019 3:16 AM, Paul wrote:
Mine looks just like this one:

Â*Â*Â*Â* https://www.matrixsynth.com/2017/07/...ty-joanna.html

The power switch LED turns on, but nothing on the output.

A schematic would sure be helpful....


Â*Â*Â* Oh, nevermind.Â* It works.
I used to successfully employ heavy guitar strings on Farfisa and
Vox organs. They would need to be wound with a metal that could be
soldered though, bronze maybe? I later learned that the original
busbars and springs on better quality instruments were often gold
plated, so I probably caused a lot of destructive wear and tear, but
I didnt know and didnt care in those days. I just wanted the thing
to work when I needed it.
Everything corrodes, but gold on gold is pretty good until it wears
through. If theyre gold, it may be worth transplanting old springs
from the upper keys to the midrange to preserve the busbar, and
kludge the lesser-used contacts.

Â*Â*Â*Â*Â*Â* OK, that sounds like a good idea. Heavy guitar strings.Â* I don't
think these are gold-plated, but I could be wrong.

Â*Â*Â*Â*Â*Â* I just compared them, and the guitar strings are definitely
much stiffer, and less pliant, than the original springs, but it
looks like it should work.

Â*Â*Â*Â*Â*Â* Still, is there a source for the original raw spring
material?Â* It
would be better, because the stiffer guitar string would definitely
affect the action and feel of the keyboard a small bit.

Â*Â*Â*Â*Â*Â* But this all answers the question of why there were 10 springs
missing in the first place!Â* They were clearly taken from this unit,
and put into another keyboard.Â* And I noticed on the Vintage Synth
website, that they are selling these springs USED, for about $4 a piece!

Â*Â*Â*Â*Â*Â* Hmmmm....no wonder people like to buy old keyboards for the
parts only!

Â*Â*Â*Â*Â*Â* :/




Â*Â*Â* I just need to clean the key springs, and buy new ones
for the ones that are missing.

Â*Â*Â* But a weird sounding keyboard for sure!Â* Nothing like
that old Italian analog sound!


Â*Â*Â* Ok, can I just go to somewhere like Home Depot, and
get stock spring, to replace the old, worn out key
springs?Â* Like get a long length of it, and cut them
to size?

Â*Â*Â* Here is a picture of similar Crumar key springs:


https://xbs111.files.wordpress.com/2...-springs-2.jpg


Â*Â*Â* Thanks for any advice.


Â*Â*Â*Â*Â* Ok, the guitar string idea works great!Â* 0.052"!

Â*Â*Â*Â*Â* There isn't really an issue with a difference
in the feel of the action, because like most organs,
each key is only ON or OFF.Â* There is no velocity
information, and most of the forces on the key, come
from the thicker main spring of each key, not the thin
contact springs.Â* So consequently, I don't feel a
difference in the action, on the keys with the guitar
string replacement.

Â*Â*Â*Â*Â* But I have found two more issues:

Â*Â*Â*Â*Â* 1)Â* How do I level the white keys on this unit?

Â*Â*Â*Â*Â* 2)Â* The high G# does not decay properly like the other keys.
Â*Â*Â*Â*Â*Â*Â*Â*Â* It almost acts like it has the sustain pedal down all the
Â*Â*Â*Â*Â*Â*Â*Â*Â* time.Â* So it keeps sustaining while the other keys decay
Â*Â*Â*Â*Â*Â*Â*Â*Â* and taper off as they should.Â* It seems like it's some
Â*Â*Â*Â*Â*Â*Â*Â*Â* sort of RC time constant, so I will probe, and check
Â*Â*Â*Â*Â*Â*Â*Â*Â* the components around this key, and compare them to it's
Â*Â*Â*Â*Â*Â*Â*Â*Â* neighboring keys.


Â*Â*Â*Â*Â*Â*Â* Ok, issue #2 has disappeared for some reason, after I cleaned
and did some in-circuit impedance checking.Â* After checking the
keys again, the G# decays properly now.

Â*Â*Â*Â*Â*Â*Â* I also found out how to level the keys.Â* There is a small
plastic box on each key, and a corresponding metal finger for
each key, with a rubber stop on the top and bottom.Â* This controls
the key dip, and the key leveling when at rest.

Â*Â*Â*Â*Â*Â*Â* I could shim each key, but I don't think it's worth my
time, since I think the sound and play-ability of this keyboard
is not exactly my cup of tea.Â* It's kind of like an analog
clavi-chord, with some vibrato, but it's rather limited, with only
the basic clav sound, and a basic electric piano voice.

Â*Â*Â*Â*Â*Â*Â* So I will likely put this unit up on Ebay.Â* I'm sure
a collector of old Italian keyboards will buy it!Â* Definitely
a historical, and rare unit!


Ok, I'm going to have to replace ALL of the original
key contact springs with 0.052" guitar string.

Why? The original contact spring metal is SUPER
thin and skinny, so much so, that even on the springs
that are not broken, most of them have formed a little
kink at the point which they contact the "key ON" bar,
which makes the contact very intermittent and unsure.
This affects the volume of the attack of the note, which
ends up being too quiet (or sometimes completely dead) on the keys
that have the original springs.

This is to be expected on a keyboard made sometime in the
70's, but even if I had been successful in finding new contact
springs identical to the originals (I thankfully wasn't!), I still think
the 0.052" guitar string would perform better, because the
increased stiffness reduces the latency between the "key OFF" bar (which
charges each capacitor), and the "key ON" bar (for discharge).

To be continued.....



 
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
interfacing to vocalist's amp, keyboard piano Soundhaspriority Pro Audio 2 September 10th 09 07:37 PM
To play any piano or keyboard in just 15 minutes a day [email protected] Pro Audio 7 July 15th 06 11:00 AM
Want to record disklavier (or other MIDI piano) in New York City studio Sayyyyyyk Pro Audio 0 May 29th 05 05:58 PM
Want to record disklavier (or other MIDI piano) in New York City studio Sayyyyyyk Pro Audio 0 May 29th 05 05:57 PM
Seeking to record disklavier in New York City studio (or other midi piano) Sayyyyyyk Pro Audio 0 May 24th 05 04:26 AM


All times are GMT +1. The time now is 02:33 AM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"