Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to rec.audio.high-end
Spica Spica is offline
external usenet poster
 
Posts: 5
Default Increasing Filter Capacitance

I'd like to increase the filter capacitance of a 21 year old subwoofer amp from the
current two 10,000uf 75v caps to a pair of 20,000uf 75v caps. The current rectifier is
a Fagor FB2502. Do you think this rectifier can handle the increase or should I
upgrade it? Also, for reference, the amp uses a single power chip per side as
opposed to discrete xistors if that matters. Thanks.
  #2   Report Post  
Posted to rec.audio.high-end
jwvm jwvm is offline
external usenet poster
 
Posts: 336
Default Increasing Filter Capacitance

On Apr 10, 10:52=A0am, (Spica) wrote:
I'd like to increase the filter capacitance of a 21 year old subwoofer am=

p from the
current two 10,000uf 75v caps to a pair of 20,000uf 75v caps. =A0


Why?

The current rectifier is
a Fagor FB2502. =A0Do you think this rectifier can handle the increase or=

should I
upgrade it? =A0Also, for reference, the amp uses a single power chip per =

side as
opposed to discrete xistors if that matters. =A0Thanks.


The extra capacitance could cause an increased current surge when the
unit is turned on but the power transformer will probably still limit
the peak current to a safe value. If you are trying to boost the
output power, you could overheat the power transformer at high sound
levels with the extra capacitance.

Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Need Help increasing volume on track adam79 Pro Audio 4 September 11th 09 09:53 PM
Energizing (increasing pitch of) vocals. [email protected] Pro Audio 18 July 23rd 06 03:45 AM
Increasing ROI Carey Carlan Pro Audio 0 September 12th 04 03:19 PM
increasing midi latency with Sonar Olivier Demaine Pro Audio 0 September 13th 03 02:17 PM
Increasing volume of wave Nathan Higgins Pro Audio 4 July 21st 03 04:52 PM


All times are GMT +1. The time now is 02:59 PM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"