Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Help: SE Output Transformers For a pair of KT88 Connected in Parallel as "g2 to B+ Triodes"
I'm planning to build an SE tube amplifier with a pair of KT88 each channel
connected in Parallel as "g2 to B+ Triodes" Is the impedance of the transformer=1k ohms? I have Z11 laminated silcon iorn with tongue width 38mm and bobbins stack height = 60mm. Is it suitable to use 0.22 wire for the primary while the DC resistance will be arround 250 ohms and current 260 mA, heating rate (260mA^2)*250ohms=16.9watts? |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
on topic: we need a rec.audio.pro.ot newsgroup! | Pro Audio | |||
S.E.X. amplifier review by Andre Jute from Glass Audio | Vacuum Tubes | |||
The Bill May Report on Single-Ended Output Transformers for 300B etc | Vacuum Tubes | |||
KISS Amp Score Card | Vacuum Tubes | |||
KISS 117 by Andre Jute | Vacuum Tubes |