Home |
Search |
Today's Posts |
#1
Posted to rec.audio.car
|
|||
|
|||
An 8KW amplifier??
|
#2
Posted to rec.audio.car
|
|||
|
|||
An 8KW amplifier??
goober wrote:
Really? http://seattle.craigslist.org/see/ele/694586532.html If you believe JBL's own specs (linked to on that ad), yes: Power Output 2600 Watts RMS x 2 channels at 4 ohms and ? 1%THD+N 8110 Watts RMS x 1 channel at 4 ohms, 14.4V supply and ? 1%THD+N 7400 Watts RMS x 1 channel at 1 ohm, 14.4V supply and ? 1%THD+N |
#3
Posted to rec.audio.car
|
|||
|
|||
An 8KW amplifier??
Matt Ion wrote:
goober wrote: Really? http://seattle.craigslist.org/see/ele/694586532.html If you believe JBL's own specs (linked to on that ad), yes: Power Output 2600 Watts RMS x 2 channels at 4 ohms and ? 1%THD+N 8110 Watts RMS x 1 channel at 4 ohms, 14.4V supply and ? 1%THD+N 7400 Watts RMS x 1 channel at 1 ohm, 14.4V supply and ? 1%THD+N I think Bob Wald needs of these to power a MTX Jackhammer. Assuming JBL isn't lying, it should put out a tad bit more on the RMS side than his Sherwood amp does. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
WTB: Alpine 4381 Time Delay remote, 3362 DSP, 3900 D/A, 3545 amplifier, and 3558 amplifier | Car Audio | |||
How about this amplifier? | Vacuum Tubes | |||
807 amplifier | Vacuum Tubes | |||
Which amplifier? | Audio Opinions | |||
Converting a two channel amplifier into a four channel amplifier. Is it possible??? | Audio Opinions |