Home |
Search |
Today's Posts |
#1
Posted to rec.audio.marketplace
|
|||
|
|||
KRELL KRC-HR High End Solid State Class-A PreAmp
If you're viewing this ad, then you pretty much know what you're
looking for. I don't need to say much more cause this preamp speaks for it's self as it doesn't need an introduction as it was consider one of the best preamps ever built even by today's standards. This preamp is built solid like a tank. This KRC-HR Class-A Line Stage Preamp, this unit is a later production built version with the KSA face plate. This unit is fresh back from the factory has been in KRELL factory in October 2006 for a complete check over, service, and freshening up. A brand new volume motor was installed by Krell during that time of the complete service. As most of you are aware the blue lights in these tends to be burned out after a while. This unit has a solid bright blue. This unit is in full working order inspected by Krell about a little over a year ago and certainly could be verified by Krell by serial number per request. This unit is in near mint condition with very few hours on it since coming back from the factory and is in excellent perfect working condition, as I said it's near mint condition with a complete check up from the factory. This unit comes complete with power supply, power & power supply cables, remote control, owner's manual and a factory box. If you're wondering why I'm parting with it since its back from having a complete service and freshening up? I have taken a career change as my new job is keeping me on the go and away from home as I have very little time to enjoy my audio and having to scale down now. Specifications: * Solid-state, remote-controlled, full-function line-level preamplifier with seven inputs, * Including one tape-loop, two balanced XLR, and four single-ended RCA. * Gain: Switchable, 6 or 12dB. S/N ratio: 96dB unweighted. * THD: 0.01% at 1kHz, 0.01% at 20kHz. * Input impedance: 47k ohms. * Output impedance: 5 ohms. Maximum output: 14V. * Dimensions: 19" W by 14.5" D by 2.5" H, preamplifier; 11" W by 9" D by 2.5" H, power supply. PayPal users: I'll accept PayPal for an additional 4% to cover the service charge. If you are concern on references my E-Bay ID is: speedemmon Contact me at (916) 826-5965 if you are interested or need more info |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
WANTED: KRELL KRC-HR Solid State Preamp | Marketplace | |||
WANTED: KRELL KRC-HR Solid State Preamp | Marketplace | |||
Experiences of Class A solid-state ? | Pro Audio | |||
DIY Class B Solid State Power Amp | Tech |