Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Silicon rectifiers ?
Don't want to get into the valve/silicon, which is best, debate. You makes
yer choices and that's OK by me. It's all down to the schematic and what you believe in.... I use silicon. Don't need a heater and low voltage drop...... IN4007 ? .. keep seeing it on schematics .... what's wrong with BY127 ? ....seems to have a better spec.. or .. I now use encapsulated industrial bridges.... About 1" square. Bolt down solid to the chassis with a 1/4" nut and bolt, have four Lucar/spade connectors.... cost about £2 and are rated at 1500 PIV at 35 AMPS !!! They don't get very warm with 500mA through them , so a heat sink is not an issue !! Any comments ? Kind regards jim |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FA : Silicon Mallet Simmons MI.D.I. Vibes | Marketplace | |||
Heil Ohmega 400 transistors | Tech | |||
seismic isolation | High End Audio |