Home |
Search |
Today's Posts |
#1
Posted to rec.audio.tech
|
|||
|
|||
Problem with Quad remotes.
I am the proud owner of a Quad CD99 CD-P player, its Pre-amp, the 909
power amp feeding the latest 989 ESL Speakers. However, from the start I have had a problem with the remotes, the one that came with the 99 can control everything, except the volume for which I have to go to the other one, I presume the one that came with the amp (?). In any case I have two and I am told that one remote should work all the system. When I said it did not do so I was told they were not wired or connected together correctly so the local tech came down to me and at the same time got on the phone to Quad, (Rob, for those that are familiar with the staff in the UK), and they "compared notes". Never mind, the next day I was still unable to use only one remote and was prepared to live with it for now, However, today I found that whereas one remote used to switch the whole system on, now it does not switch on the preamp and now to cap it all, the preamp is starting to switch itself off every now and again, what's going on? I will of course get in the local dealer again but since I had heard there had been problems with Quad remote controls units I thought I might see if anyone has had similar problems with Quad. -- Derrick Fawsitt |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
rec.audio.car FREQUENTLY ASKED QUESTIONS (caution, this is HUGE) | Car Audio | |||
QUAD 44 problem | High End Audio | |||
Open Letter to Patrick Turner | Vacuum Tubes | |||
Some Recording Techniques | Pro Audio | |||
CLC: More | Vacuum Tubes |