Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Urgently Need the Fisher Corporation Resto-Pak "manual" for 3 IF Stage Fisher 400
Here's my problem. I purchased The Fisher Corporation (Fisherdoc)
Resto-Pak for my Fisher 400. Because of the serial number (36290T), Al sent me a manual/schematic for a 4-IF stage unit. Even though my unit is a mid-30K unit, it nevertheless has the earlier 3-IF stage circuit topology. I must say that Al most graciously scanned and then emailed me the right schematic and parts list, but- unfortunately-not the instruction manual. And, I'm sure there will be differences in part references and possibly modification instructions. Can someone fax me the instruction manual for my 3-IF stage version? I'll gladly fax you the front of my Resto-Pak manual to show that I did pay for everything in the first place. Plus, I'll happly pay a reasonable sum the manual. (This may be alot faster than waiting for the right instructions from the source.) I would sure appreciate the help!! Pete Snyder 708-283-3515 (Office) |
Reply |
Thread Tools | |
Display Modes | |
|
|