Home |
Search |
Today's Posts |
#1
|
|||
|
|||
How to bypass lockout on Pioneer nav systems
OK, we figured out the real way to bypass the lockouts on the new
Pioneer nav systems. It is real simple, and does not require any complex switches or anything. This bypass will do two things: 1. Makes all nav functions available while driving (just like they should be) 2. Make video playback available while driving AVIC-N2: Underneath the unit is a small silver sticker, peel this back. There are two contacts with the label "R197". Drop a bit of solder between these to connect them. AVIC-D1: Find an extra Pioneer wire harness, and pull one of the wires out. In the AVIC-D1 harness, there is one open spot on the connector. Put this wire into the open spot on the connector, connect it to ground, then re-connect the plug to the AVIC-D1. Thats it, real easy. |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
on topic: we need a rec.audio.pro.ot newsgroup! | Pro Audio | |||
common mode rejection vs. crosstalk | Pro Audio |