Home |
Search |
Today's Posts |
#1
|
|||
|
|||
NEED ADVICE on preamp output capacitor
I have a solid state phono preamp which has a 50 micro farad electrolytic
capacitor in series with the preamp signal at the very output of the preamp. i wish to replace this cap with a film cap. what is the minimum value cap i can use and still have a response that is not rolled off due to too low a value? the phono preamp will feed a line amp with a minimum of 10000 ohms input resistance. rg |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
preamp advice | Pro Audio | |||
Advice needed: Large-Diaphragm Condenser Mic Output Level too low? | Pro Audio | |||
rec.audio.car FAQ (Part 1/5) | Car Audio | |||
Capacitors | Car Audio | |||
Splitting the preamp output for monitoring | Pro Audio |