Reply
 
Thread Tools Display Modes
  #1   Report Post  
AntiSpammer
 
Posts: n/a
Default Which Brand name still manufacture in it's original country?

Eclipse (Japan) = Made in China
PPI (USA) = Made in China
Audiobahn = Made in Korea


anyone care to add in?


  #2   Report Post  
 
Posts: n/a
Default

Ford-Made in Mexico
Chevy- Same

Harley- Parts made in Mexico

  #3   Report Post  
bobb
 
Posts: n/a
Default

and the reason for this exercise is...?
  #4   Report Post  
MZ
 
Posts: n/a
Default

Manufacturing's the "easy" part. It's usually done wherever the labor is
cheap. I'd be more interested to know where the bulk of the design is done.
I'd guess that most of the higher end stuff is in-house, though I suspect
that asian firms have a hand in a lot of it too.


"AntiSpammer" wrote in message
...
Eclipse (Japan) = Made in China
PPI (USA) = Made in China
Audiobahn = Made in Korea


anyone care to add in?




  #5   Report Post  
 
Posts: n/a
Default

A good design is only as good as the cheapest, weakest part in the
product. When a hungry 8 year old with no shoes on is making it, you
guess how it comes out.



  #6   Report Post  
MZ
 
Posts: n/a
Default

A good design is only as good as the cheapest, weakest part in the
product. When a hungry 8 year old with no shoes on is making it, you
guess how it comes out.


Equipment today is built almost flawlessly. When it goes, it's usually due
to abuse. That hungry 8 year old with no shoes on does one hell of a job.


  #7   Report Post  
 
Posts: n/a
Default

Abuse? Crap breaking within an hour of use is abuse? Cmon man. If you
want to argue just to argue ok then. But cmon. And yeah, you would do a
hell of a job too if your pops was gona beat your red hair brown if you
fugd up.

  #8   Report Post  
MZ
 
Posts: n/a
Default

Abuse? Crap breaking within an hour of use is abuse?

Usually, yeah. Abuse includes poor installation, and poor installation
includes faulty wiring and wiring up the subs/speakers wrong. If an amp or
speaker is gonna go, it usually goes right away.

Cmon man. If you
want to argue just to argue ok then. But cmon. And yeah, you would do a
hell of a job too if your pops was gona beat your red hair brown if you
fugd up.


So disagreeing with you is "arguing just to argue"? Since you're
disagreeing with me, are you "arguing just to argue" too?


  #9   Report Post  
Tony F
 
Posts: n/a
Default

My Phoenix Gold TI500.4 amplifier (Portland, OR) says "Made in USA" on it.

Tony


--
2001 Nissan Maxima SE Anniversary Edition
Eclipse CD8454 Head Unit, Phoenix Gold ZX475ti, ZX450 and ZX500 Amplifiers,
Phoenix Gold EQ-232 30-Band EQ, Dynaudio System 360 Tri-Amped In Front and
Focal 130HCs For Rear Fill, 2 Soundstream EXACT10s In Aperiodic Enclosure

2001 Chevy S10 ZR2
Pioneer DEH-P9600MP (Just gettin' started)



  #10   Report Post  
MOSFET
 
Posts: n/a
Default

I can say this with absolute certainty because I walked through the
manufacturing dept. every day when I worked there; Phoenix Gold amps and
speakers are manufactured in the good ol' US of A. In Portland, OR.

MOSFET




  #11   Report Post  
John Durbin
 
Posts: n/a
Default

Not all of them... like most brands in car audio these days, PG imports
a large chunk of their stuff. It's just the real high-end stuff that is
made there.

JD

MOSFET wrote:

I can say this with absolute certainty because I walked through the
manufacturing dept. every day when I worked there; Phoenix Gold amps and
speakers are manufactured in the good ol' US of A. In Portland, OR.

MOSFET





  #12   Report Post  
MOSFET
 
Posts: n/a
Default

Not all of them... like most brands in car audio these days, PG imports
a large chunk of their stuff. It's just the real high-end stuff that is
made there.

JD


Hmmm. Well, I worked there in 2000-20001 and I suppose some things may have
changed. But as I recall, ALL amps were manufactured on site, even the
low-end ones (I can't say for sure about all speakers). Of course, the
components to the amp were made overseas, so it might be more appropriate to
say they were ASSEMBLED in the USA.

What is your experience with PG? Did you or do you still work there (I'm
not trying to challange your ascertion, I'm just wondering if we might have
crossed paths)?

MOSFET


  #13   Report Post  
Scott Gardner
 
Posts: n/a
Default

On Mon, 28 Feb 2005 20:20:54 -0800, "MOSFET"
wrote:

I can say this with absolute certainty because I walked through the
manufacturing dept. every day when I worked there; Phoenix Gold amps and
speakers are manufactured in the good ol' US of A. In Portland, OR.

MOSFET


And all of AudioControl's stuff is still made in the rainforests of
the Pacific Northwest.

Scott
  #14   Report Post  
Tony F
 
Posts: n/a
Default

Between Phoenix Gold (Portland), Audio Control (Mountlake Terace, near
Seattle) and Cardomain, (Tukwila, also near Seattle) us people up here in
the Pacific Northwest have it made! Okay, so Cardomain is a retailer...but
a damn good one at that!!

Tony


--
2001 Nissan Maxima SE Anniversary Edition
Eclipse CD8454 Head Unit, Phoenix Gold ZX475ti, ZX450 and ZX500 Amplifiers,
Phoenix Gold EQ-232 30-Band EQ, Dynaudio System 360 Tri-Amped In Front and
Focal 130HCs For Rear Fill, 2 Soundstream EXACT10s In Aperiodic Enclosure

2001 Chevy S10 ZR2
Pioneer DEH-P9600MP (Just gettin' started)


  #15   Report Post  
 
Posts: n/a
Default


MZ wrote:
Manufacturing's the "easy" part. It's usually done wherever the

labor is
cheap. I'd be more interested to know where the bulk of the design

is done.
I'd guess that most of the higher end stuff is in-house, though I

suspect
that asian firms have a hand in a lot of it too.


That is not the point. The point is you migh bought the counterfeit
model like Alpine usually from China. China and HOng kIng are the
counterfeit
capital of the world. Buying a chinese made Alpine is like buying a
chinese made a Rolax watch.



  #16   Report Post  
 
Posts: n/a
Default


You got the old model. All the new model is from China.

Tony F wrote:
My Phoenix Gold TI500.4 amplifier (Portland, OR) says "Made in USA"

on it.

Tony


--
2001 Nissan Maxima SE Anniversary Edition
Eclipse CD8454 Head Unit, Phoenix Gold ZX475ti, ZX450 and ZX500

Amplifiers,
Phoenix Gold EQ-232 30-Band EQ, Dynaudio System 360 Tri-Amped In

Front and
Focal 130HCs For Rear Fill, 2 Soundstream EXACT10s In Aperiodic

Enclosure

2001 Chevy S10 ZR2
Pioneer DEH-P9600MP (Just gettin' started)


  #17   Report Post  
MZ
 
Posts: n/a
Default

wrote in message
oups.com...
snip

Please do not reply to my posts.


  #18   Report Post  
Barry & Nikki
 
Posts: n/a
Default

That is USA (Oosa) Japan. Not U.S.A.



"Tony F" wrote in message
...
My Phoenix Gold TI500.4 amplifier (Portland, OR) says "Made in USA" on it.

Tony


--
2001 Nissan Maxima SE Anniversary Edition
Eclipse CD8454 Head Unit, Phoenix Gold ZX475ti, ZX450 and ZX500

Amplifiers,
Phoenix Gold EQ-232 30-Band EQ, Dynaudio System 360 Tri-Amped In Front and
Focal 130HCs For Rear Fill, 2 Soundstream EXACT10s In Aperiodic Enclosure

2001 Chevy S10 ZR2
Pioneer DEH-P9600MP (Just gettin' started)





  #19   Report Post  
MOSFET
 
Posts: n/a
Default

Between Phoenix Gold (Portland), Audio Control (Mountlake Terace, near
Seattle) and Cardomain, (Tukwila, also near Seattle) us people up here in
the Pacific Northwest have it made! Okay, so Cardomain is a

retailer...but
a damn good one at that!!

Tony

ABSOLUTELY! The Northwest Rocks!

Go Huskies!
(class of '90)

MOSFET


2001 Nissan Maxima SE Anniversary Edition
Eclipse CD8454 Head Unit, Phoenix Gold ZX475ti, ZX450 and ZX500

Amplifiers,
Phoenix Gold EQ-232 30-Band EQ, Dynaudio System 360 Tri-Amped In Front and
Focal 130HCs For Rear Fill, 2 Soundstream EXACT10s In Aperiodic Enclosure

2001 Chevy S10 ZR2
Pioneer DEH-P9600MP (Just gettin' started)




  #20   Report Post  
Brett
 
Posts: n/a
Default

i got a pioneer sub made in mexico


wrote in message
ups.com...
Ford-Made in Mexico
Chevy- Same

Harley- Parts made in Mexico



Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
manufacture blank CD-R and DVD-R ananth Audio Opinions 2 January 13th 04 12:30 PM
Mackie hiring Berringher to manufacture all future product :)... Jazz-John Pro Audio 7 September 3rd 03 04:22 PM


All times are GMT +1. The time now is 05:01 PM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"