Home |
Search |
Today's Posts |
#1
Posted to rec.audio.pro
|
|||
|
|||
monitoring scenarios for PT LE.
For the time being, I'm recording with PT LE. The players need to be
able to monitor effectively in a couple of ISO booths. To overcome latency for the players, my workaround is to patch mics into channels on a Mackie board before the preamps -- Then I send from the channel direct outs into a firewire or a lightpipe preamp. I use the effects sends to route signal to personal submixers for the players. This workaroun is not so great - the power supply has a proprietary cable and a fan -- so the door to my quiet room has to stay ajar for the power supply! So I either have to a) jump up to PT HD - which is rather more $$ than I have at the moment - or b) get into some preamps with close to zero-latency monitor outputs. - or c) swap out the Mackie board for something with channel direct outs - but without a fan. - or d) some monitoring scenario I haven't considered... Suggestions? TIA. Louis |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
mp3 monitoring | Pro Audio | |||
legit scenarios for using compression during tracking? | Pro Audio | |||
in-ears for monitoring? | Pro Audio | |||
How bad is my monitoring ? | Pro Audio | |||
LS3/5A for monitoring | Pro Audio |