Reply
 
Thread Tools Display Modes
  #1   Report Post  
Clyde Slick
 
Posts: n/a
Default A Challenge to Pooh Bear/Graham

Its time to dredge out this old baby again!!

Here is a challenge for Graham:
A while ago Arnie got into a heated argument against John Atkinson
and Glenn Z regarding aspects of the J Test about whether or
not the signal should be dithered.
I would like you to revisit this issue and tell us whether
you think Arnie was correct, or if John and Glenn were correct.
Since you are on a similar level of technical expertise as
Glenn, I think your input into this matter
would be very helpful and interesting.
And a new discussion on the technical merits should
prove interesting, as well.

Here are some excerpts:
Arny can provide his own, and I am sure he gladly wil do so.
And anyone else out there can see what history they
can come up with

HERE WE GO!

John Atkinson said 12-26-2003:

It always gratifying to learn, rather late of course, that I had
bested Arny Krueger in a technical discussion. My evidence for
this statement is his habit of waiting a month, a year, or even more
after he has ducked out of a discussion before raising the subject
again on Usenet as though his arguments had prevailed. Just as he has
done here. (This subject was discussed on r.a.o in May 2002, with Real
Audio Guys Paul Bamborough and Glenn Zelniker joining me in pointing
out the flaws in Mr. Krueger's argument.)

So let's examine what the Audio Engineering Society (of which I am
a long-term member and Mr. Krueger is not) says on the subject of
testing digital gear, in their standard AES17-1998 (revision of
AES17-1991):

Section 4.2.5.2: "For measurements where the stimulus is generated in
the digital domain, such as when testing Compact-Disc (CD) players,
the reproduce sections of record/replay devices, and digital-to-analog
converters, the test signals shall be dithered.

I imagine this is what Mr. Krueger means when wrote "The AES says don't
do it." But unfortunately for Mr. Krueger, the very same AES standard
goes on to say in the very next section (4.2.5.3):

"The dither may be omitted in special cases for investigative purposes.
One example of when this is desirable is when viewing bit weights on an
oscilloscope with ramp signals. In these circumstances the dither signal
can obscure the bit variations being viewed."

As the first specific test I use an undithered signal for is indeed for
investigative purposes -- looking at how the error in a DAC's MSBs
compare to the LSB, in other words, the "bit weights" -- it looks as if
Mr. Krueger's "The AES says don't do it" is just plain wrong.

Mr. Krueger is also incorrect about the second undithered test signal
I use, which is to examine a DAC's or CD player's rejection of
word-clock jitter, to which he refers in his next paragraph:

He does other tests, relating to jitter, for which there is no
independent confirmation of reliable relevance to audibility. I hear
that this is not because nobody has tried to find correlation. It's
just that the measurement methodology is flawed, or at best has no
practical advantages over simpler methodologies that correlate better
with actual use.


And once again, Arny Krueger's lack of comprehension of why the latter
test -- the "J-Test," invented by the late Julian Dunn and implemented as
a commercially available piece of test equipment by Paul Miller -- needs
to use an undithered signal reveals that he still does not grasp the
significance of the J-Test or perhaps even the philosophy of measurement
in general. To perform a measurement to examine a specific aspect of
component behavior, you need to use a diagnostic signal. The J-Test
signal is diagnostic for the assessment of word-clock jitter because:

1) As both the components of the J-Test signal are exact integer
fractions of the sample frequency, there is _no_ quantization error.
Even without dither. Any spuriae that appear in the spectra of the
device under test's analog output are _not_ due to quantization.
Instead, they are _entirely_ due to the DUT's departure from
theoretically perfect behavior.

2) The J-Test signal has a specific sequence of 1s and 0s that
maximally stresses the DUT and this sequence has a low-enough frequency
that it will be below the DUT's jitter-cutoff frequency.

Adding dither to this signal will interfere with these characteristics,
rendering it no longer diagnostic in nature. As an example of a
_non-diagnostic terst signal, see Arny Krueger's use of a dithered
11.025kHz tone in his website tests of soundcards at a 96kHz sample
rate. This meets none of the criteria I have just outlined.

He does other tests, relating to jitter, for which there is no
independent confirmation of reliable relevance to audibility.


One can argue about the audibility of jitter, but the J-Test's lack of
dither does not render it "really weird," merely consistent and
repeatable. These, of course, are desirable in a measurement technique.
And perhaps it worth noting that, as I have pointed out before,
consistency is something lacking from Mr. Krueger's own published
measurements of digital components on his website, with different
measurement bandwidths, word lengths, and FFT sizes making comparisons
very difficult, if not impossible.

I have snipped the rest of Mr. Krueger's comments as they reveal merely
that he doesn't actually read the magazine he so loves to criticize. :-)

John Atkinson
Editor, Stereophile
-----------------------------------------------------

Glenn Zelniker said 12-27-2001
(Not in response to JA's specific post at the top of this post):

Perfectly done, John. There are no holes in your logic; you have
connected the start and end points with all the points in
between. Good enough for me, good enough for any reasonable
person. I have come to the unfortunate conclusions that Arny is
not only constitutionally unable to admit error, but that he is
also fundamentally dishonest and pathologically unable to feel
shame about his disgusting behavior. It is therefore improbable
that he will ever acknowledge what is so painfully clear to any
sane person (namely, *most* of RAO): that he was 100% in the
wrong about the J-test, that his attacking Stereophile on the
basis of the J-test was a big mistake, and that he repeatedly
attempted to shift the context of the discussion to something
where he stood at least a small chance of being correct.

I address the following remarks to the remaining few RAO holdouts
who maintain that Arny is helpful, that Arny is useful, and that
we should be patient with Arny. I maintain that there is no
reason to engage in traditional human-style discourse with Arny
if you are on his list of enemies -- that is, you are a person
who has shown him to be wrong on a technical issue and who
refuses to back away from his snot and from his bullying. Arny is
very often very demonstrably wrong on any number of things, yet
debate with him is impossible because he refuses to admit defeat
even in the face of the most irrefutable evidence. To him,
iron-clad facts are malleable, the rules of logic are fluid, and
no amount of lying, squirming, context shifting, slander, and
deceit on his part are off-base. And he'll stoop to all of these
tactics in order to avoid being wrong about even the simplest of
matters. In short, *reality itself* must be transmogrified in
order to conform to Arny's overarching compulsion to be correct.

Arny's defenders and apologists need to recognize this sad state
of affairs and realize that doing so is not tantamount to
endorsing The Other Side. Rather, they should realize that there
are a number of good scientists and engineers who will not
entertain serious debate with Arny. It's exhausting and entirely
unrewarding. All I can hope to do is point out his serious
screw-ups and hope you (the rest of RAO, that is) will realize I
am correct. I simply won't weigh in definitively on a subject
with which I'm not confident of my own abilities. As for dealing
with Arny, the most expedient thing for me will be to treat him
with derision and dismissal unless he immediately capitulates.
Past and present history prove definitively that there's no other
way.

-------------------------------------------------------------


  #2   Report Post  
Pooh Bear
 
Posts: n/a
Default

Clyde Slick wrote:

Its time to dredge out this old baby again!!

Here is a challenge for Graham:
A while ago Arnie got into a heated argument against John Atkinson
and Glenn Z regarding aspects of the J Test about whether or
not the signal should be dithered.
I would like you to revisit this issue and tell us whether
you think Arnie was correct, or if John and Glenn were correct.
Since you are on a similar level of technical expertise as
Glenn, I think your input into this matter
would be very helpful and interesting.
And a new discussion on the technical merits should
prove interesting, as well.

Here are some excerpts:


snipped for brevity

That's quite a meal you posted there Clyde. It raises a number of issues that
were doubtless once contentional but now likely to be rather less of an
isssue due to technical improvements in conversion.

I had to print out what you posted but I was still unclear who exactly was
commenting on whom.

I'll reply thus - hopefully it'll answer your questions - at least in part.


Use of dither.

Dither is essentially similar to adding noise to the signal to be quantised.
I have heard undithered digital audio at low bit depth at Neve ( where the
possibilities existed to research such stuff ) and it truly sounds awful.
Like a buzz-saw almost.

Use of a careful amount of dither introduces *new samples* that 'smooth out'
the reproduced waveform and provide a more acceptable result for human
listening.

That is a simpistic representation but essentially gives a workable overview.

As to whether you should use a dithered signal to test a D-A depends on which
characteristics you are seeking to measure. 'Horses for courses'.


Jitter.

The intelligent can deduce that jitter ( inaccuracy in the time domain ) can
be directly correlated as an equivalent error in the amplitude domain ( when
no attempt is made at jitter reduction ).

Early digital products sometimes experienced high levels of jitter. I was
involved in producing a report back in 1988 for the benefit of several
pro-audio manufacturers on this precise subject.

At worst, jitter can cause data recovery problems in the receiver of a serial
digital signal ( e.g AES or SPDIF format ) that may cause signal muting.

My investigations indicated that one specific Japanese pro-audio manufacturer
had a level of jitter that caused problems with much other digitally
interfaced equipment.

That specific Japanese manufacturer subsequently withdrew from the digital
pro-audio market.

Modern digital receivers have far 'cleverer' circuitry that can accomadate
jitter with more tolerance and reject it.

Does that help ?

Graham

p.s. the company that chose to withdraw from the digital pro-audio market is
also well known as a car manufacturer.

  #3   Report Post  
Clyde Slick
 
Posts: n/a
Default


"Pooh Bear" wrote in message
...
Clyde Slick wrote:

Its time to dredge out this old baby again!!

Here is a challenge for Graham:
A while ago Arnie got into a heated argument against John Atkinson
and Glenn Z regarding aspects of the J Test about whether or
not the signal should be dithered.
I would like you to revisit this issue and tell us whether
you think Arnie was correct, or if John and Glenn were correct.
Since you are on a similar level of technical expertise as
Glenn, I think your input into this matter
would be very helpful and interesting.
And a new discussion on the technical merits should
prove interesting, as well.

Here are some excerpts:


snipped for brevity

That's quite a meal you posted there Clyde. It raises a number of issues

that
were doubtless once contentional but now likely to be rather less of an
isssue due to technical improvements in conversion.

I had to print out what you posted but I was still unclear who exactly was
commenting on whom.

I'll reply thus - hopefully it'll answer your questions - at least in

part.


Use of dither.

Dither is essentially similar to adding noise to the signal to be

quantised.
I have heard undithered digital audio at low bit depth at Neve ( where the
possibilities existed to research such stuff ) and it truly sounds awful.
Like a buzz-saw almost.

Use of a careful amount of dither introduces *new samples* that 'smooth

out'
the reproduced waveform and provide a more acceptable result for human
listening.

That is a simpistic representation but essentially gives a workable

overview.

As to whether you should use a dithered signal to test a D-A depends on

which
characteristics you are seeking to measure. 'Horses for courses'.


Jitter.

The intelligent can deduce that jitter ( inaccuracy in the time domain )

can
be directly correlated as an equivalent error in the amplitude domain (

when
no attempt is made at jitter reduction ).

Early digital products sometimes experienced high levels of jitter. I was
involved in producing a report back in 1988 for the benefit of several
pro-audio manufacturers on this precise subject.

At worst, jitter can cause data recovery problems in the receiver of a

serial
digital signal ( e.g AES or SPDIF format ) that may cause signal muting.

My investigations indicated that one specific Japanese pro-audio

manufacturer
had a level of jitter that caused problems with much other digitally
interfaced equipment.

That specific Japanese manufacturer subsequently withdrew from the digital
pro-audio market.

Modern digital receivers have far 'cleverer' circuitry that can accomadate
jitter with more tolerance and reject it.

Does that help ?


It avoided the heart of the matter of contention, but anyway,
all that is between you, JA, Glenn Zelniker and Arnie.

no matter what happens with that one debate, sometime,
somehow you are going to have a big clash with Arnie.

that is because you are smarter than he is, you are more
highly educated than he is, more experienced than he is, and you
are actually a productive contributor in the world of product
developement in audio, which Arnie is not, at all. However,
Arnie perceives himself to be the brightest, most experienced and
most knowledgeable person posting her on RAO. So someday,
he is going to have to put you in your place. This is whetehr he
wants to or not, or tries to or not.

Arny has one advantage over you, though,.....He is insane,


  #4   Report Post  
Arny Krueger
 
Posts: n/a
Default

"Clyde Slick" wrote in message


that is because you are smarter than he is, you are more
highly educated than he is, more experienced than he is, and you
are actually a productive contributor in the world of product
developement in audio, which Arnie is not, at all.


Art that's a fight you can have with Jim Johnson, who credited me with
direct involvement an important scientific development in the world of
audio, being the ABX test. Of course you and the rest of your clique had
years of unendingly bitter battles with JJ, a fact that you now seem to
want to forget.

However,
Arnie perceives himself to be the brightest, most experienced and
most knowledgeable person posting here on RAO.


Not at all. However, in terms of technical knowlege and technical
contributions to RAO, I'm light years ahead of your clique, including
Atkinson and Zelniker. Most of you "Normals" are hopeless technical
nincumpoops. The few of you who can technically walk and chew gum at the
same time have senselessly wasted their minor amounts of time on RAO with
personal vendettas and obfuscatory defenses of their own well-known public
technical malfeasance.

So someday, he is going to have to put you in your place. This is wethehr
he
wants to or not, or tries to or not.


IOW, nobody is perfect, and not all technical experts agree about
everything. You don't get that at all, do you Art?

Arny has one advantage over you, though,.....He is insane,


Thanks for the libel Art, it's a clear case of the pot calling the knife
dull.


  #5   Report Post  
Clyde Slick
 
Posts: n/a
Default


"Arny Krueger" wrote in message
...
"Clyde Slick" wrote in message


that is because you are smarter than he is, you are more
highly educated than he is, more experienced than he is, and you
are actually a productive contributor in the world of product
developement in audio, which Arnie is not, at all.


Art that's a fight you can have with Jim Johnson, who credited me with
direct involvement an important scientific development in the world of
audio, being the ABX test. Of course you and the rest of your clique had
years of unendingly bitter battles with JJ, a fact that you now seem to
want to forget.


Uh, your involvemnet was to plagiarize someone elses work,
in developement of a program that allows you to do abx of
audio systems ona computer, which is utterly useless and stupid.

And the I didn't fight with JJ, though I remember that
you did so.


However,
Arnie perceives himself to be the brightest, most experienced and
most knowledgeable person posting here on RAO.


Not at all. However, in terms of technical knowlege and technical
contributions to RAO, I'm light years ahead of your clique, including
Atkinson and Zelniker. Most of you "Normals" are hopeless technical
nincumpoops. The few of you who can technically walk and chew gum at the
same time have senselessly wasted their minor amounts of time on RAO with
personal vendettas and obfuscatory defenses of their own well-known public
technical malfeasance.


I see, ahead of Atkinson and Zelniker, what a hoot!

So someday, he is going to have to put you in your place. This is

wethehr
he
wants to or not, or tries to or not.


IOW, nobody is perfect, and not all technical experts agree about
everything. You don't get that at all, do you Art?

Arny has one advantage over you, though,.....He is insane,


Thanks for the libel Art, it's a clear case of the pot calling the knife
dull.






  #6   Report Post  
Arny Krueger
 
Posts: n/a
Default

"Clyde Slick" wrote in message

"Arny Krueger" wrote in message
...
"Clyde Slick" wrote in message


that is because you are smarter than he is, you are more
highly educated than he is, more experienced than he is, and you
are actually a productive contributor in the world of product
development in audio, which Arnie is not, at all.


Art that's a fight you can have with Jim Johnson, who credited me
with direct involvement an important scientific development in the
world of audio, being the ABX test. Of course you and the rest of
your clique had years of unendingly bitter battles with JJ, a fact
that you now seem to want to forget.


Uh, your involvemnet was to plagiarize someone elses work,


That's one of Dormer's pet lies. Anybody who wants to can see my work such
as it is at www.pcabx.com, and anybody who can get Dormer to cut lose with
his work and see his work, can compare the two. I understand that Dormer's
program does not even implement the ABX testing methodology. There are many
other significant differences as well.

Both Dormer and I have described the prior art for this kind of program on
RAO in the distant past.

in development of a program that allows you to do abx of
audio systems ona computer, which is utterly useless and stupid.


If it's so useless and stupid why have tens of thousands of people
downloaded it?

If it's so useless and stupid why are there more than a half dozen programs
that do pretty much the same thing?

If its so useless and stupid why is it so widely accepted?

And the I didn't fight with JJ, though I remember that you did so.


JJ and I had absolutely minimal conflicts, especially compared to our
running battles with "Normals".

However,
Arnie perceives himself to be the brightest, most experienced and
most knowledgeable person posting here on RAO.


Not at all. However, in terms of technical knowledge and technical
contributions to RAO, I'm light years ahead of your clique, including
Atkinson and Zelniker. Most of you "Normals" are hopeless technical
nincumpoops. The few of you who can technically walk and chew gum at
the same time have senselessly wasted their minor amounts of time on
RAO with personal vendettas and obfuscatory defenses of their own
well-known public technical malfeasance.


I see, ahead of Atkinson and Zelniker, what a hoot!


Yes, in a very narrow and questionable field of endeavor, namely technical
posts on RAO.

If you can count posts to come up with a different result Art, be my guest.

So someday, he is going to have to put you in your place. This is
whether he
wants to or not, or tries to or not.


IOW, nobody is perfect, and not all technical experts agree about
everything. You don't get that at all, do you Art?


note that this simple question stops Art dead in his tracks. Score!

Arny has one advantage over you, though,.....He is insane,


Thanks for the libel Art, it's a clear case of the pot calling the
knife dull.


note Arts tacit admission that he's a pretty dull character. Score!


  #7   Report Post  
Clyde Slick
 
Posts: n/a
Default


"Arny Krueger" wrote in message
...

Thanks for the libel Art, it's a clear case of the pot calling the
knife dull.


note Arts tacit admission that he's a pretty dull character. Score!



Read what you wrote, IDIOT.
I would analyze yout non-analagous analgy to be that
I''m the pot calling you, the knife dull, for
wahtever that means.
If you would like to be the pot today, that's fine too.


Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
One Million Dollar Audio Challenge Greg Williams Audio Opinions 242 September 1st 04 01:48 AM
James Randi Million US$ Challenge To Well-Known Golden Ears! Arny Krueger Tech 2 August 24th 04 04:14 AM
Oktava challenge ? Geoff Wood Pro Audio 5 November 21st 03 11:55 PM
Analog/Digital Pepsi Challenge...(long-ish) transducr Pro Audio 22 October 30th 03 05:59 PM
Southeast Invitational Sound Challenge SQ 240 Car Audio 0 August 12th 03 03:09 PM


All times are GMT +1. The time now is 12:48 PM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"