Home |
Search |
Today's Posts |
#1
|
|||
|
|||
4 Sub Wiring
Hey I Have A Wiring Question......i Have 4 Single Voice Coil Subs And A 2400 Watt-(2 Ohm Stable) Amp.....i Would Like To Know How To Wire Them Up...please Include Specific Details....still Pretty New To This
|
#3
|
|||
|
|||
The problem is,****head, I will wire them parallel but i dont understand how to hook them to the amp....do bridge over the two channels with all 4 subs or 2 per channel...thanks
|
#4
|
|||
|
|||
On Thu, 10 Feb 2005 17:33:31 +0000, harvester
wrote: Zipperhead Wrote: In article , says...- Hey I Have A Wiring Question......i Have 4 Single Voice Coil Subs And A 2400 Watt-(2 Ohm Stable) Amp.....i Would Like To Know How To Wire Them Up...please Include Specific Details....still Pretty New To This - We can tell. The problem is,****head, I will wire them parallel but i dont understand how to hook them to the amp....do bridge over the two channels with all 4 subs or 2 per channel...thanks Well, ****head, the question is whether your amp can handle the low impedance resulting from wiring the subs in parallel. Bridging will only make it worse, of course. Kal |
#6
|
|||
|
|||
On Fri, 11 Feb 2005 05:12:55 +0000, harvester
wrote: Kalman Rubinson Wrote: On Thu, 10 Feb 2005 17:33:31 +0000, harvester wrote: - Zipperhead Wrote:- In article , says...- Hey I Have A Wiring Question......i Have 4 Single Voice Coil Subs And A 2400 Watt-(2 Ohm Stable) Amp.....i Would Like To Know How To Wire Them Up...please Include Specific Details....still Pretty New To This - We can tell.- The problem is,****head, I will wire them parallel but i dont understand how to hook them to the amp....do bridge over the two channels with all 4 subs or 2 per channel...thanks- Well, ****head, the question is whether your amp can handle the low impedance resulting from wiring the subs in parallel. Bridging will only make it worse, of course. Kal whats the point in a help forum if people are asses to ya.....the 2 CHANNEL AMP IS 2 OHM STABLE....WHAT IS THE BEST WAY TO WIRE 4 FOUR OHM SUBS UP TO IT... Why didn't you say that the first time, ****head. 2 subs in parallel on each stereo channel and STOP YELLING!! Kal |
#7
|
|||
|
|||
Kal[/i][/color]
whats the point in a help forum if people are asses to ya.....the 2 CHANNEL AMP IS 2 OHM STABLE....WHAT IS THE BEST WAY TO WIRE 4 FOUR OHM SUBS UP TO IT...[/i][/color] Why didn't you say that the first time, ****head. 2 subs in parallel on each stereo channel and STOP YELLING!! Kal[/quote] Thanks for the help...will be a little more clear in the future. I appreciate it. Last edited by harvester : February 12th 05 at 08:11 AM Reason: typo |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Studio wiring advice for newbies by newbies | Pro Audio | |||
Studio wiring advice for newbies by newbies | Pro Audio | |||
VW Factory CD Changer - Wiring Diagram? | Car Audio | |||
Wiring for component "drawers"? | General | |||
wiring a used DVA-5205 to test? | Car Audio |