Home |
Search |
Today's Posts |
#1
|
|||
|
|||
12V vs 14.4V specifications?
I have wondered long enough why car audio manufacturers list specs for 2
different voltages, specifically 12 volt and 14.4 volt. The power ratings at these two voltages can vary quite a bit (Phoenix Gold seems to come to mind here). Why the two sets of specs? What on earth can I do to feed my system the 14.4 volts (just drive the vehicle)? Are there any benefits to providing the system 14.4 volts? I have noticed my alt meter when driving is always above 12 volts. Is it 14.4? Can't really tell. Thanks for your explanation. Regards, Steve |
#2
|
|||
|
|||
"Steve" wrote in message m... I have wondered long enough why car audio manufacturers list specs for 2 different voltages, specifically 12 volt and 14.4 volt. The power ratings at these two voltages can vary quite a bit (Phoenix Gold seems to come to mind here). Why the two sets of specs? What on earth can I do to feed my system the 14.4 volts (just drive the vehicle)? Are there any benefits to providing the system 14.4 volts? I have noticed my alt meter when driving is always above 12 volts. Is it 14.4? Can't really tell. Thanks for your explanation. Regards, Steve The typical voltage of a vehicle running is 14.4 volts. The typical voltage of a non-running vehicle is 12 volts. That is why you see the 2 different specs. Les |
#3
|
|||
|
|||
The battery delivers 12 volts when the engine is off. When the engine is
running the alternator delivers somewhere between 13.5 and 14.4 volts to the accessories (like your amps). 12 volts is listed for competition purposes. PG rates their amps at let's say 18 watts into 4 channels at 12 volts. This would mean you have a 72 watt amplifier for the purposes of fitting you into a power category. The other rating at 14.4 volts would be 75 watts into 4 channels, putting you into the 300 watt category. It's always seemed a little silly to me. It's like a reverse handicap...at least that's the way I've thought of it. Tony -- Eclipse CD8454 Head Unit, Phoenix Gold ZX475ti, ZX450 and ZX500 Amplifiers, Phoenix Gold EQ-232 30-Band EQ, Dynaudio System 360 Tri-Amped In Front and Focal 130HCs For Rear Fill, 2 Soundstream EXACT10s In Aperiodic Enclosure "Steve" wrote in message m... I have wondered long enough why car audio manufacturers list specs for 2 different voltages, specifically 12 volt and 14.4 volt. The power ratings at these two voltages can vary quite a bit (Phoenix Gold seems to come to mind here). Why the two sets of specs? What on earth can I do to feed my system the 14.4 volts (just drive the vehicle)? Are there any benefits to providing the system 14.4 volts? I have noticed my alt meter when driving is always above 12 volts. Is it 14.4? Can't really tell. Thanks for your explanation. Regards, Steve |
#4
|
|||
|
|||
I have wondered long enough why car audio manufacturers list specs for 2
different voltages, specifically 12 volt and 14.4 volt. The power ratings at these two voltages can vary quite a bit (Phoenix Gold seems to come to mind here). Why the two sets of specs? What on earth can I do to feed my system the 14.4 volts (just drive the vehicle)? Are there any benefits to providing the system 14.4 volts? I have noticed my alt meter when driving is always above 12 volts. Is it 14.4? Can't really tell. Thanks for your explanation. The manufacturers that list only a 14.4v rating are usually doing so to be able to boast a high power output. Those that put both ratings on there are attempting to be a little more honest and thorough in their ratings. The bottom line is that it makes no difference. You cannot hear the difference between, say, 75x2 and 50x2 if they're fluctuating as the voltage is fluctuating. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Advent Laureate Floorstanding Main Speaker Technical Specifications | Audio Opinions | |||
Specifications | High End Audio | |||
Understanding Specifications | Pro Audio | |||
Specifications Ratings | Car Audio | |||
Voice Specifications | Audio Opinions |