Reply
 
Thread Tools Display Modes
  #1   Report Post  
Shiva
 
Posts: n/a
Default A Real Newbie Question


"John Cusick" wrote in message
news
OK, I'm really not sure if this is a dumb question or not... and it seems
to me that this is the place to ask.

I have a box of old radio tubes (15 or 20) that physically look NOS, but
the identification of each has been rubbed off with time and handling by
various non-cautious people.

Is there any way to identify an unknown tube type? I have a tube testor,
O'scope, pwr supply, and other various pieces of test equip.and I hate to
throw these away since I have a few old radios I would like to repair, and
may have a use for them.

I'm hoping there is a method that is simpler than hanging around Ebay for
a month in case I need a few and one of mine end up in the garbage due to
lack of ID.

Regards,

John C.


Jeesh... Looking & recognising the 'family" is the first thing - at least
you'll know if it's a triode, pentode, beam toob, whatever. In 9-pins,
it's really easy to track the pinout - that will tell a bunch.
Now for the "tricks which may or may not work" part:
Put tubes in the fridge for a few minutes. Then breath on them, rotating
them slowly - sometimes rubbed-off stamp /screen will become clear ewnough
to read.
If that fails, wipe the tubes with 8windex*, and try the same trick - once
again, works sometimes.
Basically, if you've seen a whole bunch of toobs in your life, you can tell
which's which 'cos you've seen them before...


  #2   Report Post  
rod keys
 
Posts: n/a
Default

A little household amonia on a t-shirt can sometimes bring up the numbers if
they're not gone altogether.

R

John Cusick wrote:

OK, I'm really not sure if this is a dumb question or not... and it seems
to me that this is the place to ask.

I have a box of old radio tubes (15 or 20) that physically look NOS, but
the identification of each has been rubbed off with time and handling by
various non-cautious people.

Is there any way to identify an unknown tube type? I have a tube testor,
O'scope, pwr supply, and other various pieces of test equip.and I hate to
throw these away since I have a few old radios I would like to repair, and
may have a use for them.

I'm hoping there is a method that is simpler than hanging around Ebay for
a month in case I need a few and one of mine end up in the garbage due to
lack of ID.

Regards,

John C.


Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tascam Portastudio question for a helpless newbie Maggie Conroy Pro Audio 2 October 31st 04 04:57 AM
What are they Teaching Michael McKelvy Audio Opinions 199 October 15th 04 07:56 PM
newbie question - aardvark q10 + external mixer? alex Pro Audio 1 August 14th 04 07:29 PM
NEWBIE QUESTION: Need HELP With SOUNDCRAFT MIXER! HWBossHoss Pro Audio 1 August 5th 03 02:43 PM
Newbie question 12s vs. 10s Paul Vina Car Audio 1 July 9th 03 08:09 PM


All times are GMT +1. The time now is 01:19 AM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"