Reply
 
Thread Tools Display Modes
  #1   Report Post  
Graham
 
Posts: n/a
Default wiring

!doctype html public "-//w3c//dtd html 4.0 transitional//en"
html
Dose anyone know the pin outs for a Kenwood kdc-c603 10 disk changer and
a panasonic cq-df401u deck, i have both and the cable to connect the change
to a kenwood deck, however the end for the deck is cut off and the Panasonic
is deferent then the kenwood. any ideas?/html

  #2   Report Post  
Masterson
 
Posts: n/a
Default wiring

You can't connect them.

The data protocal is different.



"Graham" wrote in message ...
Dose anyone know the pin outs for a Kenwood kdc-c603 10 disk changer and a panasonic cq-df401u deck, i have both and the cable to connect the change to a kenwood deck, however the end for the deck is cut off and the Panasonic is deferent then the kenwood. any ideas?
  #3   Report Post  
Graham
 
Posts: n/a
Default wiring

!doctype html public "-//w3c//dtd html 4.0 transitional//en"
html
body bgcolor="#FFFFFF"
there is a way if you know the pinout order on both
pMasterson wrote:
blockquote TYPE=CITEstyle/style
font face="Arial"font size=-1You
can't connect them./font/font font face="Arial"font size=-1The
data protocal is different./font/font   
blockquote
style="PADDING-RIGHT: 0px; PADDING-LEFT: 5px; MARGIN-LEFT: 5px; BORDER-LEFT: #000000 2px solid; MARGIN-RIGHT: 0px""Graham"
<a "MOle27_uvic@ hotmail.com/a
wrote in message a "news:3F6
anyone know the pin outs for a Kenwood kdc-c603 10 disk changer and a panasonic
cq-df401u deck, i have both and the cable to connect the change to a kenwood
deck, however the end for the deck is cut off and the Panasonic is deferent
then the kenwood. any ideas?/blockquote
/blockquote

/body
/html

  #4   Report Post  
Masterson
 
Posts: n/a
Default wiring

Graham,
Physically, yes you can connect them.

BUT......the two microprocessors will not talk to eachother.
Panasonic and Kenwood use proprietary data buses.
Understand?






there is a way if you know the pinout order on both


You can't connect them. The data protocal is different.


Dose anyone know the pin outs for a Kenwood kdc-c603 10 disk changer and a panasonic cq-df401u deck, i

  #5   Report Post  
Graham
 
Posts: n/a
Default wiring

!doctype html public "-//w3c//dtd html 4.0 transitional//en"
html
body bgcolor="#FFFFFF"
ok thnx then does anyone want a kenoowd 10 disk changer in perfect condition,
missing cable
pMasterson wrote:
blockquote TYPE=CITEstyle/style
font face="Arial"font size=-1Graham,/font/fontfont face="Arial"font size=-1Physically,
yes you can connect them./font/font font face="Arial"font size=-1BUT......the
two microprocessors will not talk to eachother./font/fontfont face="Arial"font size=-1Panasonic
and Kenwood use proprietary data buses./font/fontfont face="Arial"font size=-1Understand?/font/font      there
is a way if you know the pinout order on both font face="Arial"font size=-1You
can't connect them./font/font font face="Arial"font size=-1The
data protocal is different./font/font Dose anyone know the
pin outs for a Kenwood kdc-c603 10 disk changer and a panasonic cq-df401u
deck, i/blockquote

/body
/html

Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wiring for component "drawers"? Michael Volow General 2 March 13th 04 04:46 AM
Multi Media Wiring Steve General 2 September 16th 03 09:26 PM
wiring a used DVA-5205 to test? Robert Drake Car Audio 1 August 14th 03 04:09 AM
Aerostar power door lock wiring Eddie Runner Car Audio 2 July 28th 03 05:22 PM
Amplifier wiring kit Brian Car Audio 2 July 14th 03 05:15 PM


All times are GMT +1. The time now is 11:56 AM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"