Reply
 
Thread Tools Display Modes
  #1   Report Post  
Posted to rec.audio.pro
[email protected] dottiedoyle@gmail.com is offline
external usenet poster
 
Posts: 1
Default How to pronounce Langevin?

On Sunday, April 25, 2004 at 10:25:59 AM UTC-4, Twist Turner wrote:
I just talked to a guy who had been in the studio business for 45 years,
his cusom built board from the 60's was built with AM16 modules. He
pronounced it Lanj-a-vin, I always thought it was pronounced Lang-a-vin.
Which is right?



Twist Turner
http://tinyurl.com/ul70


  #3   Report Post  
Posted to rec.audio.pro
Don Pearce[_3_] Don Pearce[_3_] is offline
external usenet poster
 
Posts: 2,417
Default How to pronounce Langevin?

On Mon, 15 Feb 2016 07:09:05 -0800 (PST), wrote:

On Sunday, April 25, 2004 at 10:25:59 AM UTC-4, Twist Turner wrote:
I just talked to a guy who had been in the studio business for 45 years,
his cusom built board from the 60's was built with AM16 modules. He
pronounced it Lanj-a-vin, I always thought it was pronounced Lang-a-vin.
Which is right?



Twist Turner
http://tinyurl.com/ul70

Lonzh-uh-van is about as close as I can type. Except the final n is
not pronounced fully - it is a nasal French termination in which the
tongue tip does not touch the roof of the mouth.

d

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

  #4   Report Post  
Posted to rec.audio.pro
geoff geoff is offline
external usenet poster
 
Posts: 1,481
Default How to pronounce Langevin?

On 16/02/2016 6:01 a.m., Don Pearce wrote:
On Mon, 15 Feb 2016 07:09:05 -0800 (PST), wrote:

On Sunday, April 25, 2004 at 10:25:59 AM UTC-4, Twist Turner wrote:
I just talked to a guy who had been in the studio business for 45 years,
his cusom built board from the 60's was built with AM16 modules. He
pronounced it Lanj-a-vin, I always thought it was pronounced Lang-a-vin.
Which is right?



Twist Turner
http://tinyurl.com/ul70
Lonzh-uh-van is about as close as I can type. Except the final n is
not pronounced fully - it is a nasal French termination in which the
tongue tip does not touch the roof of the mouth.

d


I go with this one. Maybe even completely dropping the "-uh-".

geoff
  #5   Report Post  
Posted to rec.audio.pro
JackA JackA is offline
external usenet poster
 
Posts: 2,052
Default How to pronounce Langevin?

On Monday, February 15, 2016 at 3:56:32 PM UTC-5, geoff wrote:
On 16/02/2016 6:01 a.m., Don Pearce wrote:
On Mon, 15 Feb 2016 07:09:05 -0800 (PST), wrote:

On Sunday, April 25, 2004 at 10:25:59 AM UTC-4, Twist Turner wrote:
I just talked to a guy who had been in the studio business for 45 years,
his cusom built board from the 60's was built with AM16 modules. He
pronounced it Lanj-a-vin, I always thought it was pronounced Lang-a-vin.
Which is right?



Twist Turner
http://tinyurl.com/ul70



Sounds like music (on site) of the early 70's!! Not bad!

Jack
Lonzh-uh-van is about as close as I can type. Except the final n is
not pronounced fully - it is a nasal French termination in which the
tongue tip does not touch the roof of the mouth.

d


I go with this one. Maybe even completely dropping the "-uh-".

geoff


Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pronounce B & K? [email protected] Pro Audio 7 August 22nd 12 08:32 AM
FS: Langevin Dual Vocal Combo by Manley Labs - Langevin DVC Dr. Gruv Pro Audio 0 April 6th 06 02:44 AM
FS: Langevin DVC bran Pro Audio 1 October 18th 05 02:53 AM
FS: Langevin DVC, Massive Passive, Langevin Vari mu, Demeter tube pre++ blncmn Pro Audio 0 May 24th 05 10:18 AM
How to pronounce Langevin? Last Samurai Pro Audio 1 May 10th 04 02:53 PM


All times are GMT +1. The time now is 09:55 AM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"