Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Shure V15 super sensitive
Someone asked:
By the way, in which direction is it skipping? Forward or backward? Max Metral topposted: Forward, and in kind of an "odd" manner, it doesn't really make a traditional "skip" noise, it just jumps a few grooves forward, almost as if the inward force just simply overcame the tracking force. Is there an antiskaating adjustment, and is it correctly adjusted? There is not much audio production about this, so I added a cross-post to rec.audio.tech and a FUT pointing thataway ... Kind regards Peter Larsen -- ************************************************** *********** * My site is at: http://www.muyiovatki.dk * ************************************************** *********** |
#2
|
|||
|
|||
Shure V15 super sensitive
"Peter Larsen" wrote in message
... Someone asked: By the way, in which direction is it skipping? Forward or backward? Max Metral topposted: Forward, and in kind of an "odd" manner, it doesn't really make a traditional "skip" noise, it just jumps a few grooves forward, almost as if the inward force just simply overcame the tracking force. Is there an antiskaating adjustment, and is it correctly adjusted? There is not much audio production about this, so I added a cross-post to rec.audio.tech and a FUT pointing thataway ... Thanks for the cross post, the antiskate on this tonearm is apparently not functional according to the tech that replaced it. They also said it was extremely unlikely that this skipping is caused by the antiskate issue, but it certainly could be as that's really what it looks like. Perhaps it's time for a new tonearm, anybody got good reco's for a TD125 that I've already put too much into? |
#3
|
|||
|
|||
Shure V15 super sensitive
"Peter Larsen" wrote in message
... Someone asked: By the way, in which direction is it skipping? Forward or backward? Max Metral topposted: Forward, and in kind of an "odd" manner, it doesn't really make a traditional "skip" noise, it just jumps a few grooves forward, almost as if the inward force just simply overcame the tracking force. Is there an antiskaating adjustment, and is it correctly adjusted? There is not much audio production about this, so I added a cross-post to rec.audio.tech and a FUT pointing thataway ... Thanks for the cross post, the antiskate on this tonearm is apparently not functional according to the tech that replaced it. They also said it was extremely unlikely that this skipping is caused by the antiskate issue, but it certainly could be as that's really what it looks like. Perhaps it's time for a new tonearm, anybody got good reco's for a TD125 that I've already put too much into? |
#4
|
|||
|
|||
Shure V15 super sensitive
Max Metral wrote:
"Peter Larsen" wrote in message ... Thanks for the cross post, It is just that it is plain a lot easier to find a post here .... O;-) [da skipæing problem] Perhaps it's time for a new tonearm, anybody got good reco's for a TD125 that I've already put too much into? TD126 ... TD125! .. the one with super soft chassis suspenbsion that is very poorly damped? .... you may not have a cartridge/tonearm issue, at least not a *major* one, but instead an issue of VLF vibrsations, such as step noise. I am not certain that I remember this correctly, but I think the suspension springs are undamped. IF so, mind you IF, then it may, just may, be an idea to stuff them with a small piece of foam rubber. It is generally a sane concept to have a grammophone on a shelf on a wall rather than on an item of furniture that stands on the floor. A stone or concrete slab on a soft/vibration isolated mount may be a good way of obtaining even better decoupling. Perhaps other people here can comment on the properties of the TD125? Kind regards Peter Larsen -- ************************************************** *********** * My site is at: http://www.muyiovatki.dk * ************************************************** *********** |
#5
|
|||
|
|||
Shure V15 super sensitive
Max Metral wrote:
"Peter Larsen" wrote in message ... Thanks for the cross post, It is just that it is plain a lot easier to find a post here .... O;-) [da skipæing problem] Perhaps it's time for a new tonearm, anybody got good reco's for a TD125 that I've already put too much into? TD126 ... TD125! .. the one with super soft chassis suspenbsion that is very poorly damped? .... you may not have a cartridge/tonearm issue, at least not a *major* one, but instead an issue of VLF vibrsations, such as step noise. I am not certain that I remember this correctly, but I think the suspension springs are undamped. IF so, mind you IF, then it may, just may, be an idea to stuff them with a small piece of foam rubber. It is generally a sane concept to have a grammophone on a shelf on a wall rather than on an item of furniture that stands on the floor. A stone or concrete slab on a soft/vibration isolated mount may be a good way of obtaining even better decoupling. Perhaps other people here can comment on the properties of the TD125? Kind regards Peter Larsen -- ************************************************** *********** * My site is at: http://www.muyiovatki.dk * ************************************************** *********** |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Mics, amplifiers, speakers and processors for sale in liquidation of production inventory | Pro Audio | |||
Shure V15 super sensitive | Pro Audio | |||
16-bit and vinyl with a Shure V15 | Pro Audio | |||
MXL V67G vs SHURE KSM-27 | Pro Audio |