Home |
Search |
Today's Posts |
#1
|
|||
|
|||
Mounting tape for AudioVox SIRCK1 docking station
Hi,
I attempted to mount the SIRCK1 docking station for the AudioVox SIRPNP2 Sirius satellite receiver in my car. The SIRCK1 comes with 3M mounting tape and I followed the instructions for installing it carefully. The tape adhered to the car dash, but the tape did not adhere to the mounting bracket. Since the tape was attached to the mounting bracket as part of the manufacturing process, I assume it wasn't attached properly. I found some similar tape, 3M Heavy Duty Exterior Mounting Tape, at a local arts store, and that did the trick. However, I wonder if the tape will hold when summer comes and the inside of the car gets hot. Any ideas would be appreciated. My notes about the AudioVox SIRPNP2 are at http://www.tuxcat.com/benjy/ham/sirius/ Benjy |
#2
|
|||
|
|||
Mounting tape for AudioVox SIRCK1 docking station
I never use those STICK ON mounts...
Drive some screws through it!! ;-) Benjy Cline wrote: Hi, I attempted to mount the SIRCK1 docking station for the AudioVox SIRPNP2 Sirius satellite receiver in my car. The SIRCK1 comes with 3M mounting tape and I followed the instructions for installing it carefully. The tape adhered to the car dash, but the tape did not adhere to the mounting bracket. Since the tape was attached to the mounting bracket as part of the manufacturing process, I assume it wasn't attached properly. I found some similar tape, 3M Heavy Duty Exterior Mounting Tape, at a local arts store, and that did the trick. However, I wonder if the tape will hold when summer comes and the inside of the car gets hot. Any ideas would be appreciated. My notes about the AudioVox SIRPNP2 are at http://www.tuxcat.com/benjy/ham/sirius/ Benjy |