Reply
 
Thread Tools Display Modes
  #1   Report Post  
 
Posts: n/a
Default FS-TEFLON SILVER PLATED COPPER

Offering Teflon coated silver plated copper wire in various gauges and
configurations. With a low minimum total order of $20.00 you can now
experiment with the preferred dialectric (excluding vacuum & air).
plus actual postage. 10% off on orders over $100.00, 20% off on
orders over $200.00, 25% off on orders over $300.00(excluding postage
& sales tax).Prices are per foot. Radial film capacitors , Axial film
capacitors , and Ferrite clamps are also available and are included
towards discount amounts. California residents add 7.25% sales tax.

Stranded conductors
#32awg $.10
#30awg $.12
#28awg $.15
#26awg $.18 also available in solid core twisted pair ($.40)
#24awg $.20 also available in solid core ($.20)
#22awg $.25 also available in solid core ($.25)
#20awg $.30
#18awg $.45
#16awg $.55
#14awg $.75
#12awg $1.50
#10awg $2.50
# 8awg $3.50

stranded center, teflon insulation, silverplated copper shield, then
thick teflon tape
24awg $.75
22awg $.85
20awg $1.00

twisted pair stranded center, teflon insulation, silverplated copper
shield together, then thick teflon tape (makes good interconnect,
especially 18awg, if you prefer more bottom in your tonal balance try
the 16awg, need the top tilted up go w/ smaller gauges. this has been
my listening experience YMMV)
26awg $1.10
24awg $1.25
22awg $1.35
20awg $1.55
18awg $1.75
16awg $2.35

three conductor, same as above (26 and 24awg would be good to use for
balanced interconnect, 16 and 14awg makes good power cords or try
three runs of some 12 or 10awg above though it is more difficult to
fit them in IEC plug ends). Female IEC plug ends: 10amp $3 each, 15amp
$3.50 each.
26awg $1.35
24awg $1.55
16awg $3.25
14awg $4.50 (no shield or tape)

tin plated copper braid shielding
3/4" (approximately 7awg) flat $2.50
1/4" (approximately 10awg) tubular $1.10
7/32(approximately 12awg) tubular $1.00
11/64(approximately 14awg) tubular $.90

Teflon tubing
26awg $.20
24awg $.25
22awg $.30
20awg $.35
18awg $.40
16awg $.50
13awg $.75 (thick wall)

heat shrink tubing
3/64" $.14
1/16" $.20
3/32" $.22
1/8" $.26
3/16" $.28
1/4" $.27
3/8" $.40
1/2" $.45
3/4" $.72
1" $.85
1.5" $1.50
2" $2.00

polymesh braiding
1/2" $.75 (black)
3/4" $1.25 (black or natural)
1 1/4" $2.50 (black)

Female IEC plug ends: 10amp $3 each, 15amp $3.50 each.

All sales subject to stock on hand.
To place an order contact via email:


Teflon® is a registered trademark of DuPont

Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pioneer Silver Era components for Sale (tuner, decompressor, time-tunnel reverb) ME Designer General 1 December 24th 03 03:55 AM
Silver Biwire Speaker Cables Lawrence Leung High End Audio 2 November 24th 03 06:24 PM
science vs. pseudo-science ludovic mirabel High End Audio 91 October 3rd 03 09:56 PM
Tricky Question in Electronics Silver Oxide TT Audio Opinions 8 August 12th 03 08:01 PM
Is Mitsui Gold CD-R really any better than Silver? SF Pro Audio 16 August 4th 03 06:16 PM


All times are GMT +1. The time now is 08:43 PM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"