Home |
Search |
Today's Posts |
#1
Posted to rec.audio.pro
|
|||
|
|||
Yamaha 01v Fader Repair?
I'm fairly handy with a soldering iron, but I'm betting this one's
beyond me. Picked up a used Yamha 01V mixing console for $350. Channel 11 has issues. It will not allow any signal to pass until it hits about 80% of the fader (as you fade to the top of the fader), then it comes in full force. It also won't move (motorized) through the section where it won't register. When in the 20% of the fader that works, it's flawless... but... I'd rather have all 12 faders working perfectly. Any ideas what could cause this? Any thoughts on a fix? I have some Caig Deoxit, which I was going to try tonight, but I'm fairly certain it's not just a dirty fader... although I could be wrong, I suppose. There is a local repair center that thinks they can replace it for around $150. Seems a bit steep for a simple fader replacement, especially if I could do it myself, but, that motorized portion makes me think this could potentially be beyond my skill set/knowledge base. Thanks, folks! Any input is greatly appreciated! Corey |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Bad CD Repair allows to copy files from bad CD or HDD. If your text or mp3 or any other type of file is corrupted then use Bad CD Repair to save it! Restore your data | General | |||
YAMAHA SPX-90 digital reverb effects for REPAIR or PARTS | Marketplace | |||
Yamaha CR 1020 receiver repair | Marketplace | |||
Yamaha CR-1020 receiver repair | Marketplace | |||
beogram 8000 turntable repair any shadetree repair techs out there? s | High End Audio |