Home |
Search |
Today's Posts |
#1
Posted to rec.audio.tech
|
|||
|
|||
strobe light on Thorens TD-125 Mk II turntable won't light
After nearly 33 years of faithful service the strobe light will not
light. The turntable runs fine otherwise. Assuming the light bulb/lamp has burned out, can it be replaced? If so, where can I get a new light (if they're still available)? My understanding is that it's messy to replace (a lamp soldered on the PC board I believe). I guess I can use the turntable wirthout the strobe light working (and use strobe discs to adjust the speed) but I'd really like to have it working. Many thanks for the help/comments. |
#2
Posted to rec.audio.tech
|
|||
|
|||
strobe light on Thorens TD-125 Mk II turntable won't light
|
#3
Posted to rec.audio.tech
|
|||
|
|||
strobe light on Thorens TD-125 Mk II turntable won't light
|
#5
Posted to rec.audio.tech
|
|||
|
|||
strobe light on Thorens TD-125 Mk II turntable won't light
On Thu, 23 Nov 2006 08:54:51 -0500, "Arny Krueger"
arnyk_at_comcast_dot_net wrote: Hmm common neon bulbs are rated for 25,000 hour life. There are 8760 hours in a year. 3 years seems about right. If you're playing vinyl 24 hours a day :-) How many weeks do you get off a stylus? And have your records any groove left? |
#6
Posted to rec.audio.tech
|
|||
|
|||
strobe light on Thorens TD-125 Mk II turntable won't light
Many thanks for the reference and reminding me to check the manual! I have this manual but I guess after 33 years I didn't remember how detailed it is. I'm slightly embarassed about that but I still need to find a suitable replacement light. This doesn't look too scary to repair (I hope). François Yves Le Gal wrote: On 22 Nov 2006 23:38:00 -0800, wrote: Assuming the light bulb/lamp has burned out, can it be replaced? Yes. Check page 32 in the user manual (page 28 in the pdf below). http://www.theanalogdept.com/images/.../Td125mkii.pdf |
#7
Posted to rec.audio.tech
|
|||
|
|||
strobe light on Thorens TD-125 Mk II turntable won't light
I think the subject of this message should be changed to "Need strobe lens for Thorens TD 125 Mk II turntable". I just took the turntables off to examine the light and discovered that the strobe lens is broken. Since the light is held by pressure to its contacts by the lens and since the lens is broken, the light will not work. I'm going to try to glue the lens back together (with expoxy glue?) but if that doesn't work is there a lens out there that I can get? The light, it turns out, still works fine. Many thanks again. PS: I would still like to get a light to have on hand just in case I really do need it some time. wrote: After nearly 33 years of faithful service the strobe light will not light. The turntable runs fine otherwise. Assuming the light bulb/lamp has burned out, can it be replaced? If so, where can I get a new light (if they're still available)? My understanding is that it's messy to replace (a lamp soldered on the PC board I believe). I guess I can use the turntable wirthout the strobe light working (and use strobe discs to adjust the speed) but I'd really like to have it working. Many thanks for the help/comments. |
#8
Posted to rec.audio.tech
|
|||
|
|||
strobe light on Thorens TD-125 Mk II turntable won't light
wrote in message oups.com... After nearly 33 years of faithful service the strobe light will not light. The turntable runs fine otherwise. Assuming the light bulb/lamp has burned out, can it be replaced? If so, where can I get a new light (if they're still available)? My understanding is that it's messy to replace (a lamp soldered on the PC board I believe). I guess I can use the turntable wirthout the strobe light working (and use strobe discs to adjust the speed) but I'd really like to have it working. Many thanks for the help/comments. **I've done dozens of these things. Forget about trying to obtain a replacement neon, they're hard to find, or very expensive. Fortunately, there are other options. Tap into the low Voltage AC supply and use it to run one or more LEDs. Most of my clients prefer blue nowadays, as that is the colour de jour. Side benefit is that the LED/s last pretty much forever and, if you choose the right LED, can be significantly brighter. -- Trevor Wilson www.rageaudio.com.au -- Posted via a free Usenet account from http://www.teranews.com |
#9
Posted to rec.audio.tech
|
|||
|
|||
strobe light on Thorens TD-125 Mk II turntable won't light
Arny Krueger wrote:
"Mark D. Zacharias" wrote in message om... wrote: After nearly 33 years of faithful service the strobe light will not light. The turntable runs fine otherwise. Assuming the light bulb/lamp has burned out, can it be replaced? If so, where can I get a new light (if they're still available)? My understanding is that it's messy to replace (a lamp soldered on the PC board I believe). I guess I can use the turntable wirthout the strobe light working (and use strobe discs to adjust the speed) but I'd really like to have it working. Many thanks for the help/comments. Most turntable strobes used neon lamps. An LED would not likely have gone bad, and it's unlikely that it used any sort of incandescent lamp. New neon replacements that one can get these days are cheap made-in China crap, and whereas your original lasted 30+ years, you'll be lucky if the replacement lasts 3 years. Hmm common neon bulbs are rated for 25,000 hour life. There are 8760 hours in a year. 3 years seems about right. I wasn't talking about 3 years continuous use. The actual hours accumulated in my mind would have been MUCH lass than that. Changing the subject a bit, I've been seeing MCM fuse lamps and bayonet / screw base lamps failing after less than 20 hours usage. Made in Taiwan / China. It's unfortunate that where the originals last the user 30+ year, when these lamps are replaced in the course of a repair, the lamps go out within a month or 2 of average use. I've gone to LED replacements for these lamps, from a guy over on eBay. They're about 4.25 each, but you only have to do the job once. Mark Z. |
#10
Posted to rec.audio.tech
|
|||
|
|||
strobe light on Thorens TD-125 Mk II turntable won't light
François Yves Le Gal writes:
On 22 Nov 2006 23:38:00 -0800, wrote: Assuming the light bulb/lamp has burned out, can it be replaced? Yes. Check page 32 in the user manual (page 28 in the pdf below). http://www.theanalogdept.com/images/.../Td125mkii.pdf What a wonderful manual! A tribute to Thorens. -- % Randy Yates % "She's sweet on Wagner-I think she'd die for Beethoven. %% Fuquay-Varina, NC % She love the way Puccini lays down a tune, and %%% 919-577-9882 % Verdi's always creepin' from her room." %%%% % "Rockaria", *A New World Record*, ELO http://home.earthlink.net/~yatescr |
#11
Posted to rec.audio.tech
|
|||
|
|||
strobe light on Thorens TD-125 Mk II turntable won't light
"Mark D. Zacharias" wrote in message om... Arny Krueger wrote: "Mark D. Zacharias" wrote in message om... wrote: After nearly 33 years of faithful service the strobe light will not light. The turntable runs fine otherwise. Assuming the light bulb/lamp has burned out, can it be replaced? If so, where can I get a new light (if they're still available)? My understanding is that it's messy to replace (a lamp soldered on the PC board I believe). I guess I can use the turntable wirthout the strobe light working (and use strobe discs to adjust the speed) but I'd really like to have it working. Many thanks for the help/comments. Most turntable strobes used neon lamps. An LED would not likely have gone bad, and it's unlikely that it used any sort of incandescent lamp. New neon replacements that one can get these days are cheap made-in China crap, and whereas your original lasted 30+ years, you'll be lucky if the replacement lasts 3 years. Hmm common neon bulbs are rated for 25,000 hour life. There are 8760 hours in a year. 3 years seems about right. I wasn't talking about 3 years continuous use. The actual hours accumulated in my mind would have been MUCH lass than that. Changing the subject a bit, I've been seeing MCM fuse lamps and bayonet / screw base lamps failing after less than 20 hours usage. Made in Taiwan / China. It's unfortunate that where the originals last the user 30+ year, when these lamps are replaced in the course of a repair, the lamps go out within a month or 2 of average use. I've gone to LED replacements for these lamps, from a guy over on eBay. They're about 4.25 each, but you only have to do the job once. This seems to be a widely-used approach that simply works. |
Reply |
Thread Tools | |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Turntable strobe disk | Tech | |||
Number of strobe dots on a Technics SL-1200* turntable | Tech | |||
Thorens TD-125 Mk II Turntable with SME 3009 Arm | Marketplace | |||
Need help with interpreting turntable strobe | Tech |