Reply
 
Thread Tools Display Modes
  #1   Report Post  
philicorda
 
Posts: n/a
Default Shiny new portable recorder.

I've been considering an Edirol R1 for a while, but this looks rather good.
It's called a microtrack. Records to Flash/microdrive.
8 hours battery, 24/96, phantom, SPDIF in, balanced ins... $499.
I wonder what the converters are like?

http://www.m-audio.com/products/en_u...rack-main.html
  #2   Report Post  
Edi Zubovic
 
Posts: n/a
Default

On Sun, 24 Jul 2005 22:37:15 GMT, philicorda
wrote:

I've been considering an Edirol R1 for a while, but this looks rather good.
It's called a microtrack. Records to Flash/microdrive.
8 hours battery, 24/96, phantom, SPDIF in, balanced ins... $499.
I wonder what the converters are like?

http://www.m-audio.com/products/en_u...rack-main.html


Yes! -- It seems promising to me. Watchout, Sony. Well, as to
converters I think, if they are 24/96, they must be good enough for
16/44 too {had it a, say, bluetooth or alike, remote control, it would
be just great but have we to wait a while still?}

Edi Zubovic, Crikvenica, Croatia
  #5   Report Post  
 
Posts: n/a
Default

Hmmm. 1/8 in. stereo or SPDIF Inputs and RCA outputs.... seems like the
line in/out should have been the other way around.



  #6   Report Post  
philicorda
 
Posts: n/a
Default

On Mon, 25 Jul 2005 08:56:03 -0700, tymish wrote:

Hmmm. 1/8 in. stereo or SPDIF Inputs and RCA outputs.... seems like the
line in/out should have been the other way around.


The inputs are balanced 1/4" TRS with 48v phantom. There is also a 1/8"
mic input with 5v for electrets. I hope the mic pre/line gain adjustment
is done on the analog side, before the A/Ds.
  #8   Report Post  
Jonny Durango
 
Posts: n/a
Default

philicorda wrote:
I've been considering an Edirol R1 for a while, but this looks rather good.
It's called a microtrack. Records to Flash/microdrive.
8 hours battery, 24/96, phantom, SPDIF in, balanced ins... $499.
I wonder what the converters are like?

http://www.m-audio.com/products/en_u...rack-main.html


I can't find anything out about the size of this thing. You can get a
good idea by looking at the 1/8" jacks on the side, but does anyone know
the actual dimensions? Either way, it looks a lot smaller than the
R1....the only drawback is the lack of high-quality built-in mics. At
first I thought the mics on the R1 would be a poor quality gimmick, but
after hearing the samples, why tote around 2 SDC's or even a single
stereo mic when the built in mics sound great?

But I think for REAL field work, the 48v phantom, 1/4" TRS ins and line
outs on seperate "channels" puts this ahead of the R1, assuming it has
the same high-quality pre's and ADC....but even if it doesn't, it has
SPDIF in which for some stupid reason the R1 doesn't have....just pick
up a mic2496 and you're set.

Anyway, here are some more articles I found about it:

http://createdigitalmusic.com/index....63&Item id=44

http://createdigitalmusic.com/index....81&Item id=44

From the looks of this, it appears to be significantly smaller than the R1.

"...the Flash Tracker looks from the SonicState report to be half the
size, in an iPod-like, curved shell."

Anyway, according to Doug at OADE, the digital level controls could
really hurt the sound quality of this device. Does anyone know if the R1
has digital level controls or analog?

Quoted:
"Sadly this thing uses a digital level control that probably cannot be
bypassed or improved. Fine for MP3 users or ENG but not so great for
tapers or audiophiles. Think JB3/MD analog input sound quality."

Jonny Durango
  #10   Report Post  
Peter A. Stoll
 
Posts: n/a
Default

(Mike Rivers) wrote in news:znr1122310342k@trad:


For me, a just barely big enough flash card would be enough to record
over a whole weekend, perhaps 20 to 30 hours.


For that, I agree, nothing less that a notebook class hard drive will do
(as, for example, in the Sound Devices 722). As you and I can buy them for
$60 retail, you'd think they could be put in a reasonable machine, but
these low-volume machines sell at ferocious hardware markups to amortize
development, marketing, and handholding, so I'm afraid ones with such
drives will remain expensive. Microdrives in that capacity are not
current, and in CF envelope I'm not convinced magnetic disk has the
permanent advantage over semiconductor memory that seems so clear in the
larger forms.

I haven't used $1,000-$1,500 worth of media on a weekend recording gig
since the 2" tape days. Sure, you can re-use it, but it would take a
week on-and-off to transfer all those cards to another medium.


The upload speed from a decent card in a decent reader may rival the upload
speed from an HD, but I imagine you are thinking about swap time. At the
moment, on the 722, uploading from the card is actually faster (about 6
Mbytes/second vs. 3, in round numbers), the HD being limited by a 1394
implementation that wants tuning.

But, nit-picking aside, I can see CF is not yet the answer for someone with
your recording duration need. In maybe three years, quite possibly yes.

I wonder whether the firmware in these CF machines actually is set up to
handle cards bigger than 2 or 4 Gb. There are some implementation seams at
those two points which may trip up a machine or two. I can vouch the 722
handles a 4Gb card from personal use.



  #11   Report Post  
Mike Rivers
 
Posts: n/a
Default


In article writes:

http://www.m-audio.com/products/en_u...rack-main.html

I can't find anything out about the size of this thing. You can get a
good idea by looking at the 1/8" jacks on the side, but does anyone know
the actual dimensions?


Nobody knows anything. It's a pre-pre-release teaser announcement.
Wasn't anyone at the NAMM show? They probably had one there.

What size would you like it to be? Generally the size of a portable
audio device is mostly a function of the connectors and controls. I'd
like it to be big enough to have XLRs in and at least 1/4" jacks out,
but I'd settle for 1/4" jacks in if the controls are big enough so you
can hit the right button easily. I'd guess it's about 1 x 3 x 5
inches.

Anyway, according to Doug at OADE, the digital level controls could
really hurt the sound quality of this device. Does anyone know if the R1
has digital level controls or analog?


I don't see anything mechanical on the M-Audio with the possible
exception of the buttons on the side. That means the gain is digitally
controlled, and I'll bet it's not a digitally controlled analog
attenuator. That probably means that when you turn it up, you amplify
the front end noise and when you turn it down, you can get the meters
to read below full scale and still have clipping. Better bring a
pocket full of attenuators.


--
I'm really Mike Rivers )
However, until the spam goes away or Hell freezes over,
lots of IP addresses are blocked from this system. If
you e-mail me and it bounces, use your secret decoder ring
and reach me he double-m-eleven-double-zero at yahoo
  #12   Report Post  
Arny Krueger
 
Posts: n/a
Default

"Mike Rivers" wrote in message
news:znr1122330509k@trad

I don't see anything mechanical on the M-Audio with the

possible
exception of the buttons on the side. That means the gain

is digitally
controlled, and I'll bet it's not a digitally controlled

analog
attenuator.


I'm hoping that you'll lose that bet, Mike.

I seem to recall that about six months ago TI announced a
new low-power-supply-voltage (+/-5) high-performance mic
preamp chip with a built-in digitally-controlled analog
attenuator. Seems like the time might be right for that part
to start showing up all over the place.

Yup, here it is:

http://focus.ti.com/docs/prod/folder...t/pga2500.html



  #13   Report Post  
Richard Crowley
 
Posts: n/a
Default


"Arny Krueger" wrote in message
...
"Mike Rivers" wrote in message
news:znr1122330509k@trad

I don't see anything mechanical on the M-Audio with the

possible
exception of the buttons on the side. That means the gain

is digitally
controlled, and I'll bet it's not a digitally controlled

analog
attenuator.


I'm hoping that you'll lose that bet, Mike.

I seem to recall that about six months ago TI announced a
new low-power-supply-voltage (+/-5) high-performance mic
preamp chip with a built-in digitally-controlled analog
attenuator. Seems like the time might be right for that part
to start showing up all over the place.

Yup, here it is:

http://focus.ti.com/docs/prod/folder...t/pga2500.html


Seems like wishful thinking to imagine that small portable
unit uses a mic preamp chip like the 2500. Would that it
were so.

Doug Oade in his "tapers" online forum....

"Sadly this thing uses a digital level control that probably cannot be
bypassed or improved. Fine for MP3 users or ENG but not so great for
tapers
or audiophiles. Think JB3/MD analog input sound quality. Still, the
promise
of this thing is as a non resampling 24 bit storage device for the Grace
V3,
Apogee MiniMe or MOD UA5. Until we see Microphone Preamps with A/D
converters that include CF slots, something like this unit is our best
hope
for low cost storage.
Let us all hope they managed to include a good quality 24 bit S/PDIF
input..Doug"

http://www.oade.com/Tapers_Section/F..._id=3088&page=

  #14   Report Post  
Arny Krueger
 
Posts: n/a
Default

"Richard Crowley" wrote in message

"Arny Krueger" wrote in message
...
"Mike Rivers" wrote in message
news:znr1122330509k@trad

I don't see anything mechanical on the M-Audio with the

possible
exception of the buttons on the side. That means the
gain

is digitally
controlled, and I'll bet it's not a digitally controlled

analog
attenuator.


I'm hoping that you'll lose that bet, Mike.

I seem to recall that about six months ago TI announced a
new low-power-supply-voltage (+/-5) high-performance mic
preamp chip with a built-in digitally-controlled analog
attenuator. Seems like the time might be right for that
part to start showing up all over the place.

Yup, here it is:

http://focus.ti.com/docs/prod/folder...t/pga2500.html


Seems like wishful thinking to imagine that small portable
unit uses a mic preamp chip like the 2500. Would that it
were so.


Time will tell.

Doug Oade in his "tapers" online forum....


"Sadly this thing uses a digital level control that
probably cannot be bypassed or improved. Fine for MP3
users or ENG but not so great for tapers
or audiophiles. Think JB3/MD analog input sound quality.
Still, the promise
of this thing is as a non resampling 24 bit storage
device for the Grace V3,
Apogee MiniMe or MOD UA5. Until we see Microphone Preamps
with A/D converters that include CF slots, something like
this unit is our best hope
for low cost storage.
Let us all hope they managed to include a good quality 24
bit S/PDIF input..Doug"


http://www.oade.com/Tapers_Section/F..._id=3088&page=


I think that Doug knows as much factual information about
the Microtrack as anybody else who has read the M-Audio
press release. ;-)


  #15   Report Post  
Justin Ulysses Morse
 
Posts: n/a
Default

Mike Rivers wrote:

For me, a just barely big enough flash card would be enough to record
over a whole weekend, perhaps 20 to 30 hours.

I haven't used $1,000-$1,500 worth of media on a weekend recording gig
since the 2" tape days. Sure, you can re-use it, but it would take a
week on-and-off to transfer all those cards to another medium.



I imagine you'd do fine with 2 or 3 of these 4G cards (maybe 8-12 hrs
at 44.1/24), and do an upload to your laptop back at the hotel each
night. You don't have to sit there and watch the upload take place.
Then you burn CDR or DVD-R backups of thes files, and delete them from
the CF cards.

And you don't "use $1000 worth of media on a weekend." The media is
reusable, so consider it equipment, not media. The media is the DVD-R
which costs $0.30 apiece and you use three of them for the weekend.

Even if this recorder sells "street" for the $500 MSRP, and you need
four $250 4G CF cards, you've still got yourself a high-resolution
digital recorder that fits in your shirt pocket for $1500. That's
amazingly cheap.

Is there a good AD converter that'll fit in the other pocket?

ulysses


  #18   Report Post  
Mike Rivers
 
Posts: n/a
Default


In article 1122352738.0d1d4016a81af2dddf505e9f9f317dbe@teran ews writes:

I imagine you'd do fine with 2 or 3 of these 4G cards (maybe 8-12 hrs
at 44.1/24), and do an upload to your laptop back at the hotel each
night.


That's the obviousl solution, but after a day of working at a
festival, fiddling with my recording equipment is about the last thing
I want to do (or even want to have to remember to do). And I distrust
computers enough so that, while I could let it run unattended while
I'm soaking in the hot tub, I would definitely want to check the copy
before erasing the flash card. I suppose that a "file compare" utility
might work OK for that, but I'd rather play it and listen.

And you don't "use $1000 worth of media on a weekend." The media is
reusable, so consider it equipment, not media. The media is the DVD-R
which costs $0.30 apiece and you use three of them for the weekend.


OK, so the recorder costs $1000 more than the apparent cost. That's
still too much. Plus it requires carrying a computer as well as the
recorder. And seeing as how my laptop computer doesn't have a DVD-R
drive, I'd have to either get a new computer or get an external DVD
burner, which is another box to carry with me. When I get "paid" $200
for a weekend (if that much) I can't justify the investment.

My Jukebox 3 (I bought it when it was brand new) cost $300, stores
more than 20 hours of stereo recording, and is small enough so that I
can toss it into my festival tool kit. If I choose to do someone a
favor and make them a CD of their set to give them the next day, I can
let the file transfer run while I'm taking a shower, and burn the CD
(on my present laptop computer, which, I'll admit, I'll probably have
with me) while I'm getting dressed. It will be a rough CD with no
track markers, but it will be quick. And I won't have to erase the
"master" and use the media again the next day.

Even if this recorder sells "street" for the $500 MSRP, and you need
four $250 4G CF cards, you've still got yourself a high-resolution
digital recorder that fits in your shirt pocket for $1500. That's
amazingly cheap.


I can buy a Sound Devices for that, with an internal hard drive and
real XLR mic inputs. If I was going to spend $1500, I'd go that route,
or possibly the Edirol R-4 which gives me 4 channels if recording that
way makes sense. I would actually prefer something larger and heavier
than shirt pocket size so it's not as likely to slide off the table if
a cable gets pulled.

Is there a good AD converter that'll fit in the other pocket?


I've often considered accessorizing my Jukebox that way, but I haven't
found the right one at the right price yet. The Jukebox's digital
input is S/PDIF optical, and it uses even a sleazier connector than
TOSLink. It's one of those kludges with an optical sensor at the end
of the line input (mini phone) jack. It works, but I don't trust it
any more than I trust analog audio plugged into that jack.



--
I'm really Mike Rivers )
However, until the spam goes away or Hell freezes over,
lots of IP addresses are blocked from this system. If
you e-mail me and it bounces, use your secret decoder ring
and reach me he double-m-eleven-double-zero at yahoo
  #20   Report Post  
Peter A. Stoll
 
Posts: n/a
Default

(Mike Rivers) wrote in news:znr1122378632k@trad:


OK, so the recorder costs $1000 more than the apparent cost. That's
still too much. Plus it requires carrying a computer as well as the
recorder. And seeing as how my laptop computer doesn't have a DVD-R
drive, I'd have to either get a new computer or get an external DVD
burner, which is another box to carry with me. When I get "paid" $200
for a weekend (if that much) I can't justify the investment.


Mike, I doubt this is a solution for you, but in case other are following
this thread:

An alternate to laptops or burners for storing flash card data has
cropped up mostly in the digital photography world. Some are called
"image tanks". At the bare bones minimum, they are basically a box with
a laptop hard drive, a battery, one or more card reader interfaces, and
one or more computer interfaces.

I just bought an extraordinaryly inexpensive example of the breed. The
Digimate II-Plus as sold with a preinstalled 30 Gbyte hard drive by
mwave.com for $105 delivered.

-Has reader ports for nearly all current flash cards. Slower than more
expensive models, about 2.1 Mbytes/sec for large files. (faster models
will do 6 to 12, but cost several times more)
-Lithium Polymer battery is good for about 80 minutes (about 9 Gigabytes
of upload.
-Has USB2 computer interface, can upload large files at about 9
Gigabyte/sec from its HD to a USB2 PC (much slower to a USB1 PC)
-uploading card to disk it dirt simple. power on the Digimate, stick in
the card, observe the card ID light up on the display and that adequate
free space (shown) remains on the HD to upload the card data amount
(shown). Push the "upload" button. Watch a progress display if you are
conservative.
-uploading from the Digimate to a PC is almost as simple--just plug in
the usb cable and an XP PC will recognize it as a device, and display its
contents in Windows Explorer as an additional drive. Each separate
uploading of a card is placed in a separate directory, so you are safe if
your file from yesterday has the same name as your file from today.

Downsides
-unknown manufacturer--no comfort factor of a major support organizatiom
-slow card upload speed

Upsides
-amazingly inexpensive
-sturdy construction
-good upload progress display for situational awareness

People who are considering a flash field recorder might think of a gadget
in this class. Other, faster models currently popular with the storage-
heads at dpreview.com's user forums include the Nexto-CF (somewhat over
$250 by the time you add your own hard drive), and the PD70X (something
like $200-250 or more). Neither is sold by U.S. sellers, but they are
easy enough to find on eBay or overseas web sites.

Peter A. Stoll


  #22   Report Post  
 
Posts: n/a
Default


"Arny Krueger" wrote in message
...
"Mike Rivers" wrote in message
news:znr1122330509k@trad

I don't see anything mechanical on the M-Audio with the

possible
exception of the buttons on the side. That means the gain

is digitally
controlled, and I'll bet it's not a digitally controlled

analog
attenuator.


I'm hoping that you'll lose that bet, Mike.

I seem to recall that about six months ago TI announced a
new low-power-supply-voltage (+/-5) high-performance mic
preamp chip with a built-in digitally-controlled analog
attenuator. Seems like the time might be right for that part
to start showing up all over the place.

Yup, here it is:

http://focus.ti.com/docs/prod/folder...t/pga2500.html


It has a serious problem as a component for small portable applications: It
draws 300mW per channel. A stereo recorder, using a pair of these preamps,
will draw over half a watt---and that's without even considering the rest of
the recorder.

Norm Strong


  #23   Report Post  
Arny Krueger
 
Posts: n/a
Default

wrote in message
news
"Arny Krueger" wrote in message
...
"Mike Rivers" wrote in message
news:znr1122330509k@trad

I don't see anything mechanical on the M-Audio with the

possible
exception of the buttons on the side. That means the
gain

is digitally
controlled, and I'll bet it's not a digitally controlled

analog
attenuator.


I'm hoping that you'll lose that bet, Mike.

I seem to recall that about six months ago TI announced a
new low-power-supply-voltage (+/-5) high-performance mic
preamp chip with a built-in digitally-controlled analog
attenuator. Seems like the time might be right for that
part to start showing up all over the place.

Yup, here it is:

http://focus.ti.com/docs/prod/folder...t/pga2500.html


It has a serious problem as a component for small
portable applications: It draws 300mW per channel.


I noticed that. Like 30-40 milliamps for each of the plus
and minus 5 volt supplies. It's almost like what good is
the low voltage operation?

A stereo recorder, using a pair of these preamps, will

draw
over half a watt---and that's without even considering
the rest of the recorder.


If you haven't had the experience Norm, hard drive based
portable recorders like my Nomad NJB3 run pretty warm. I
think that total device dissipation while playing .wav files
is like 5 watts or more. That's why the size of these
devices is dominated by the batteries and their mass
storage.


  #24   Report Post  
Mike Rivers
 
Posts: n/a
Default


In article writes:

I sort of homed in the microdrive option which is a disk
drive option.


I thought about the Fostex FR-2 (I think that's the number) because it
would take a Microdrive, but that was before the digital camera folks
started picking up the Microdrive, the price went down a bit, and the
reports of occasionally losing all the data started coming in. I don't
think I'd trust that for a field recording when there's no chance to
do another take, and you might not even find out that you need another
take until too late.

Mike, I also don't share your need for gobs of in-device
storage, probably because I might be a lot more comfortable
with offloading stuff from the portable via USB.


If it was for in-house use, it wouldn't be that much of a problem. But
when I go off on a field trip, I like to minimize the amount of stuff
that I have to carry with me, as well as the amount of stuff that I
have to hook up in order to make a recording. This is why I'm looking
for something that doesn't need to be unloaded before I can get back
to work. It's also why I'm looking for something that has usable mic
inputs so I don't have to carry an outboard preamp if I'm not
recording from an existing mixer.



--
I'm really Mike Rivers )
However, until the spam goes away or Hell freezes over,
lots of IP addresses are blocked from this system. If
you e-mail me and it bounces, use your secret decoder ring
and reach me he double-m-eleven-double-zero at yahoo
  #25   Report Post  
Mike Rivers
 
Posts: n/a
Default


In article 38 writes:

An alternate to laptops or burners for storing flash card data has
cropped up mostly in the digital photography world. Some are called
"image tanks". At the bare bones minimum, they are basically a box with
a laptop hard drive, a battery, one or more card reader interfaces, and
one or more computer interfaces.


Somebody (a camera person, in fact) showed me one of those. Still,
it's intermediate, temporarly storage. There's something very
comforting about taking the media out of the recorder and putting it
away. A lot of the field recording that I do doesn't get played or
produced immediately. It could sit on the shelf for several years
before someone pulls it out to see what went on at that festival that
year. Tape reels and cassettes were berry berry good for that.

Recording on a flash card, copying to a portable disk drive, then
again to a CD or DVD for shelf storage means that your only copy (what
then becomes the "master") is third generation. I know that digital
copies are supposed to be perfect clones, but now and then something
goes wrong. When it does, you don't lose a little high end like making
an analog tape copy, you lose everything.



--
I'm really Mike Rivers )
However, until the spam goes away or Hell freezes over,
lots of IP addresses are blocked from this system. If
you e-mail me and it bounces, use your secret decoder ring
and reach me he double-m-eleven-double-zero at yahoo


  #26   Report Post  
Jonny Durango
 
Posts: n/a
Default

Arny Krueger wrote:
I sort of homed in the microdrive option which is a disk
drive option.

Mike, I also don't share your need for gobs of in-device
storage, probably because I might be a lot more comfortable
with offloading stuff from the portable via USB.



I agree....a 2 or 4GB CF card is plenty for most ppl, myself included,
especially considering the battery will probably die before you use 4
gigs. I could understand for people who record musical festivals or
shows in which multiple bands are playing, or long lectures and such,
but I think the average "taper" records less than an hour or two at a
time and would rather have something they can throw in the pocket for
spur-of-the-moment recordings as opposed to lugging some big mechinal
hard drive around that will record 40 hours of uncompressed audio.

I think we've all run in to that situation, somewhere, it could be
anywhere at any time where there is a sound or something so incredible
that we pray that something like the microtracker would fall from the
heavens into our hands. Anyway, I applaud M-Audio and hope in the final
version they put more thought into the gain stages and level monitoring.

Jonny Durango
  #27   Report Post  
Mike Rivers
 
Posts: n/a
Default


In article writes:

http://focus.ti.com/docs/prod/folder...t/pga2500.html

It has a serious problem as a component for small portable applications: It
draws 300mW per channel. A stereo recorder, using a pair of these preamps,
will draw over half a watt---and that's without even considering the rest of
the recorder.


Hey, that's good. Probably gen-u-wine pretty-close-to-Class-A
operation. But not good for a battery powered portable, for sure.



--
I'm really Mike Rivers )
However, until the spam goes away or Hell freezes over,
lots of IP addresses are blocked from this system. If
you e-mail me and it bounces, use your secret decoder ring
and reach me he double-m-eleven-double-zero at yahoo
  #33   Report Post  
Jonny Durango
 
Posts: n/a
Default

Mike Rivers wrote:

This is exactly the problem - the products are designed for the
"average" user and that's all you can buy unless you're willing to pay
at least three times the price for a difference that's worth maybe
$50. But "economy of scale" talks. The average user would tell you
that he couldn't use it because his microphone plug won't fit and he
can't take the disk out (like a flash card) and plug it into his
computer. In fact, the true "average" user isn't even interested in
recording, which is why there are so many more loadable players than
recorders available.



Very true...I agree there is a market gap between devices like the R1
and the 722T that is only filled with cheesy consumer grade stuff like
the JB3 and iRiver thingy. But for the average "taper" or semi-pro
recordist, most people don't need more than an 8GB CF card for one
recording. And if they need more overall storage, keep in mind that you
can buy any number of flash cards, but a HD has an absolute limit, that
might be further restricted by the firmware or FAT.

Hopefully in the future, as the market becomes more competetive, the
price of CF media will come way down and we can all be happy.

Jonny Durango
  #35   Report Post  
Richard Crowley
 
Posts: n/a
Default

"Mike Rivers" wrote ...
Another (for me) loser. No internal hard drive. Can't afford the media
to use it for a weekend long gig without having to recycle, and I
don't want to trust myself to do that correctly when I'm tired.


*IF* you had enough time between sets/performers and *IF*
this thing works with CF audio recorders, this might the the answer..

http://www.supergooddeal.com/product_p/hs80otg.htm

80GB space for $158
Automatically (one button) downloads device contents into
hard drive without using computer, etc.

If I had known about this I might have got a Marantz PMD-660
and this thing to take with me to Spain last month.




  #36   Report Post  
Jeffrey Friedman
 
Posts: n/a
Default

On Mon, 25 Jul 2005 17:55:13 -0500, "Peter A. Stoll"
wrote:

(Mike Rivers) wrote in news:znr1122310342k@trad:


For me, a just barely big enough flash card would be enough to record
over a whole weekend, perhaps 20 to 30 hours.



I wonder whether the firmware in these CF machines actually is set up to
handle cards bigger than 2 or 4 Gb. There are some implementation seams at
those two points which may trip up a machine or two. I can vouch the 722
handles a 4Gb card from personal use.


The Edirol R1 works fine with 8 GB CF cards, although in 2 GB max
pieces. If they came up with a firmware revision to auto split files
at some reasonable size (1 or 2 GB) it would be perfect. Now it
just shuts down and saves at the 2 GB limit.

Jeff

  #37   Report Post  
 
Posts: n/a
Default

I've thought about the Cinte also, but until it Googles up more than 5
hits (with just one user opinion), I'm holding off. There's plenty of
other options for CF standalone storage that aren't unreasonable
(Wolverine, SmartDisk), but yeah the Cintre's quite a bit cheaper.


I just don't get the grousing about the media. You buy some large
cards and a storage unit (the Wolverine 80 gig is $270) and you record.
Every two hours you swap cards. It's not as if half the other stuff
we do isn't a pain in the ass.

  #39   Report Post  
Mike Rivers
 
Posts: n/a
Default


In article writes:

The Edirol R1 works fine with 8 GB CF cards, although in 2 GB max
pieces.


As far as recording goes, I have no problem with a 2 GB limit. There
are always places to break, at least for the things I record. What's
nice about using, for example, cassettes, is that you can record one
set on a cassette, you change tapes at the end of the set, and you've
only invested a couple of dollars. A $50 tape budget can cover a
weekend and you don't have to worry about recycling the media.

A 1 GB card would probably be about the equivalent in terms of
recording time, but that's (just guessing here) about $25 per card,
plus the darn things are so small you can't write anything on them
except maybe for an index number, so how do you know what's on each
card?

If they came up with a firmware revision to auto split files
at some reasonable size (1 or 2 GB) it would be perfect.


I'd rather have a button I can press to do that. The Jukebox 3 with
the current firmware does that (when I can remember which button to
press) but it leaves a small gap. No problem if you split during a
pause. The bigger the files, the more difficult they are to handle -
longer transfer time, more "receiver" space required, and more to lose
if it doesn't work.

I know that professional news photographers are all using digital
cameras with flash cards. I wonder what kind of failure rates they
have? On the other hand, photos take up a whole lot less space than
audio, so you can shoot all day on one card, transfer the files in a
few minutes, and chances are if you work for a newspaper or agency,
they're paying for the media anyway.



--
I'm really Mike Rivers )
However, until the spam goes away or Hell freezes over,
lots of IP addresses are blocked from this system. If
you e-mail me and it bounces, use your secret decoder ring
and reach me he double-m-eleven-double-zero at yahoo
Reply
Thread Tools
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Marantz PMD660 portable digital recorder review Paul Rubin Pro Audio 63 May 3rd 05 04:37 PM
Recommended portable analogue audio recorder? Mike Pro Audio 24 February 5th 05 04:53 PM
Question FAQ: rec.audio.* Recording 2/99 (part 7 of 13) [email protected] Pro Audio 0 December 28th 04 12:19 PM
can portable cassette recorder record on Type II tapes? 00 General 2 November 10th 03 02:36 PM
[?] Looking for a portable solid-state stereo tape recorder David Chapman Pro Audio 3 August 20th 03 03:01 PM


All times are GMT +1. The time now is 08:13 AM.

Powered by: vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 AudioBanter.com.
The comments are property of their posters.
 

About Us

"It's about Audio and hi-fi"